Control All 3D Scanning and Probing Measurement and Data
A metrology tool for feature-based part inspection.
Interfacing in real-time with any measuring device – including stationary and portable CMMs, laser trackers and scanners, and various others, this metrology tool for feature-based part inspection from Verisurf, allows you to easily measure features from precise single points to point clouds. Set unique GD&T constraints, see the device graphically displayed on your screen, plus smart tools automatically recognize and display features while you are measuring.
For enhanced accuracy and ease of use, Verisurf Measure also includes FeatureAlign and AutoAlign. Use FeatureAlign to align the part to the device based on measured features and datums. Use AutoAlign to align the device directly to the CAD model. These new, innovative feature allows you to store alignment schemes and automate inspection routines to guide the device through inspection. Plus, you can easily create intuitive, visual HTML or Excel-based inspection reports.
Verisurf MEASURE controls all 3D scanning and probing measurement and data. Verisurf MEASURE automates device alignments, measurement, inspection and reporting of measured features and surfaces to blueprints or CAD models. Probe based reverse engineering. Inspection data annotating and reporting in HTML, Excel and PDF formats.
Related Content
-
Breaking Down 3D Scanning in Moldmaking
Identifying 3D scanning requirements and implementing the appropriate technology.
-
Questions and Considerations Before Sending Your Mold Out for Service
Communication is essential for proper polishing, hot runner manifold cleaning, mold repair, laser engraving and laser welding services.
-
Line Width vs. Depth Ratio in Laser Engraving
A laser does not produce 90-degree sidewalls. It requires a certain amount of draft in order to produce the required pattern.
