Double Ejection Systems Designed to Control Sequence of Plate Openings
CUMSA USA double ejections systems are designed to control the sequence of the double ejections or plate openings.
CUMSA USA double ejections systems are designed to control the sequence of the double ejections or plate openings. The difference in the three models (EX, EZ, EY) is the plate opening movement. Each type comes in four rod diameters: 14,20,32 and 50mm. All styles feature external setup, easy installation and simple maintenance.
The EX is the external superior plate separator that can be used in a pre-opening plate movement of the mold, as well as a double ejection system. The EY external double ejection line is designed for molds where the upper set of ejection plates are separated and the machine actuates the lower set of ejector plates. The EZ external plate synchronized is designed to enable synchronized mold plate opening regardless of location.
Extension rods are available for the EX, EY and EZ lines, enabling the use of the external double-ejections systems in taller molds.
Simple cylinder calculations provide good first look comparisons for proper sizing when moldmakers are considering the most suitable side-action option early in the mold design.
Turbulent-flow plastic baffles eliminate blow-by, significantly improving cooling and cycle times.
When insulation is necessary to build a mold, the moldmaker must consider the insulation's properties and what effects these properties will have on mold performance.