Copper Alloys for Injection, Thermoform and Blow Molds
June 23 at 2pm EST, MoldMaking Technology is hosting a webinar that will review the strengths and weaknesses of the copper alloys used in plastic molding today. Register here.
Materion Performance Alloys has worked with MMT over the years providing technical content on a variety of mold material issues, including common mistakes with copper alloy usage and copper alloy classes. That education continues tomorrow, June 23 at 2pm EST when MoldMaking Technology hosts a webinar by Materion that will review the strengths and weaknesses of the copper alloys used in plastic molding today.
Topics will include: how copper alloys differ from steel in plastic molding, how copper alloys can improve the plastic molding process and characteristics of copper alloys versus steel.
Watch the recorded webinar here.
Related Content
-
Roughing, Finishing Aluminum-Specific End Mill Line Expansion
Extended range of Sandvik Coromant’s CoroMill Dura versatile solid end mills engages stable cutting, small burr, good surfaces and minimal vibration.
-
How to Select the Right Tool Steel for Mold Cavities
With cavity steel or alloy selection, there are many variables that can dictate the best option for moldmaking.
-
What to Look for in Aluminum Mold Alloys
The importance of strength, anodization, weldability, machinability, flatness and porosity to aluminum injection and thermoform molds.