9/27/2019 | 3 MINUTE READ

Leadtime Leader Q&A: X-Cell Tool and Mold on Automation

Originally titled 'Leadtime Leader Q&A: X-Cell Tool and Mold'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

X-Cell Tool and Mold discusses how automation is used to increase machine utilization and reduce costs.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Automating machining processes has been a critical component to X-Cell Tool’s ability to reduce lead times. When did you first begin using it and why?

Jim Cummings, general manager: It was back in 2011 that we started looking at robots for our EDM cells in an effort to reduce cost by increasing unattended time. The next benefit was the longer continuous run times; we were also increasing machine utilization as well.

 

How are you currently using automation in your shop?

Cummings: The current thought process is similar, but the motivation is now leaning more toward machine utilization as opposed to unattended time. I think the mindset has shifted more toward the idea that, if the machine is going to run, it will run unattended (that is a given), so let’s run it continuously for as long as possible. Then let’s have the next job ready to set up and minimize the downtime. We want to productionize the machining process, running jobs in batches, order-by-order, rather than running like a job shop where it is workpiece by workpiece. Our machines that have integrated robots are production centers, and we need to get as many hours out of them as possible. Of course, you always have those ones, twos and “fews” that can be disruptive, but they need to be done as well. The best time to get those completed is during the day when your moldmaker is there to set them up. But at the end of the day, the moldmaker must be ready to turn that robot back on and run production through the night.

So we have established another mantra at X-Cell. When you punch that time clock in the morning, you should already be asking yourself, “What am I going have ready to run tonight?” At that point, you spend the time to set up that next long-running job. Maybe it takes until lunchtime to have it ready, and that’s okay because now you have the rest of the day to get those two parts for that other job done, too. At the end of the day, you can turn your robot on and start running the production job you set up earlier in the day.

Another possible scenario is you have a production job set up using your robot, and it is running when you arrive in the morning. That is great! In that case, when the robot comes to a good stopping point, you can pause the program, put the production pallets back in the carousel, bring an empty magnet, vise or pallet into the machine and set up those two parts to get them done during the day. When those two parts are done, flip that robot back on, and you are running in auto through the night. It is all about the UP TIME.

Bottom line, you need to have the mindset of “What am I running tonight?” and plan for that to happen.

 

Does X-Cell Tool have a plan for expanding its automation capabilities in the short-term? If yes, please share that plan and the motivation for it. If not, what is your next operational focus?

Cummings: Currently, we are creating a five-Axis Yasda Hard Mill Work Cell that will include our current YMC 430, a new YMC 650 and upgrading an existing System 3R WorkPartner robot. By upgrading the robot capacity with another bookshelf configured for taller components and positioning the robot between these two five-axis machines, it will serve both machines.

This type of cell requires more attention to dialing it in because cutter wear can affect quality when holding the 0.0001-inch tolerance. Therefore, our goal is to set up a hard mill operation to rough at night and finish during the day when we have the operator there to monitor the quality.

We are also looking into adding automation to our lathes for soft turning. Again, this is with the primary goal of increasing our utilization of those machines.

 


RELATED CONTENT

  • A Shortcut for Improving Toolroom Efficiency

    Developments, strategies, processes and technologies are available to help ensure an efficient toolroom.

  • Mold Design Tips for Automation

    Automation suppliers can assist mold manufacturers with proper mold design and engineering before cutting steel for new molds. Hot runner molds, cold runner molds, box filling, insert molding, stack molds and multi-component molding are areas that can be built and managed more inexpensively, reliably and simpler.

  • Transform Grinding into a CNC-Based Technology

    Why is it so difficult to automate the grinding department? A common concern in mold shops is how to make the grinding department resemble the rest of the shop.

Resources