8/6/2019 | 3 MINUTE READ

Leadtime Leader Q&A: X-Cell Tool and Mold

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The current Leadtime Leader, X-Cell Tool and Mold, shares current capabilities and a glimpse of the changes occurring inside their molding operations.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

X-Cell enjoys an impressive first-pass quality rate of 99.7% and an on-time delivery rate average of 94.7%. How do you help maintain these statistics on the molding side?

Aaron Bentley, molding manager: We do a lot of parts sampling, troubleshooting and mold validation. When we build new molds, we want to ensure that they go to our customers’ facilities without any issues for a smooth transition to production. Validation services can include PPAP, first article inspection, Design of Experiments (DoE), IQ/OQ/PQ process validations, factory acceptance tests and more. Some customers will have a representative here to go through the validation process with us. It is a hand-in-hand, teamwork-based procedure to help them get the results they require. If a customer wants a representative from X-Cell to be at his plant to do a sampling, we’re there. We will do whatever it takes to meet or exceed our customers’ needs and expectations.

In addition, with every new mold, we go through the scientific injection molding (SIM) process. This does not necessarily mean that we run a full-blown SIM study on every tool. Rather, we tailor the sampling and the qualification plans used to each customer’s needs. For instance, we might do a gateway study, a viscosity curve, a short-shot progression or a pressure-loss study. We can conduct any of those tests as needed, and we have a set process checklist that we use for every new mold to ensure the best results possible and no unexpected issues. Many customers have their own set of protocols for validating the molds, and we will gladly adapt ours to include their processes, too. If there is any issue, we correct it the right way. Band-aid fixes are not acceptable. In this way, we can document and build historical knowledge about each mold should it ever come back to us for repair or maintenance, and this results in a huge time savings for the customer, not to mention shorter lead times for us.

We also have the capability to provide a full, turnkey program for customers. This is where we take delivery, at our facility, of the molding machine our customer plans to use and build a mold for it, incorporate robots, assembly or inspection equipment, then qualify the entire system with the mold and machine simultaneously. Then we ship the entire setup to the customer. It is an expensive process to do because you have to ship the molding machine twice, but it benefits the customer, especially when we are building complex systems like this with very tight tolerances.

 

Do you offer production molding at your facility?

Bentley: Today, we do offer some low-volume production molding, and we are expanding our molding facility into our new, 21,000-square-foot addition. Currently, we have seven presses ranging from a seven-ton tabletop machine up to a 390-ton Toshiba EC390SX all-electric horizontal press. We also have a Nissei 77-ton vertical press, which is used for more manual processing like insert molding, over molding and reel-to-reel, where we move stamped metal parts into the press and shoot over them. We do that for customers in automotive and electronics industry, mainly.

We predominantly mold medical parts, and that makes up about 80 to 85% of our molding business. X-Cell has two ISO Class 7 soft-side clean rooms for sampling or production and is ISO 13485 certified for molding medical device components. In addition to that, we mold caps and closures, and parts for consumer goods and the food and beverage markets.

 

 


Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Eliminating Seams

    A zero-parting-line process requires collaboration among the toolmaker, its texturization provider and the OEM.

  • A Look at What You Missed

    What happens at Amerimold stays at Amerimold. Well, that’s not true. Attendees return to their shops with what they’ve learned from the technical conference program and exhibit floor technology displays. Here is a look at what you may have missed.

  • What’s Your HR Pain Point?

    Members of the American Mold Builders Association (AMBA) gathered together last week in a breakout session geared toward helping them bridge their HR “pain points” by sharing experiences and solutions.

Resources