6/5/2019 | 1 MINUTE READ

Amerimold 2019: Fueling Growth One Mold Engineer At a Time

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

MoldMaking Technology’s Christina Fuges and Cynthia Kustush have served on the board of The Society of Plastics Engineers Mold Technologies Division for a few years now and know the knowledge and expertise this Division has to offer. Stop by and visit with other industry board members at Amerimold Booth 311.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon


Do make it a point to swing by the Society of Plastics Engineers (SPE) Mold Technologies Division’s (MTD) booth 311 while you are attending the Amerimold Expo. This division of SPE is all about fostering growth in the mold building and engineering profession by encouraging the training of mold builders at the apprentice level, supporting the continuing development of established mold builders, and by gathering and exchanging information on materials and mold performance.

Everyone is invited and encouraged to get involved as a member or active board member.  Stop by Booth 311 during Amerimold to speak with a board member to find out what this Division offers.

Of special note is the MTD’s annual announcement and presentation of its Mold Maker and Mold Designer of the Year Awards. These will be presented at the SPE MTD booth 311 at 1pm on Thursday, June 13. These awards give recognition to individuals who not only are regarded as technical leaders, but also work to 'give back' to our industry.


RELATED CONTENT

  • Largest Amerimold Show Floor to Date; See Technology Display

    Amerimold, The Event for Mold Manufacturing, closed on June 16th, 2016, at the Suburban Collection Showplace in Novi, MI. The two-day tradeshow, technical conference and networking event featured more than 3,000 participants, representing every aspect of the plastic injection molding cycle. The Amerimold exhibit hall was the largest ever and included 200 exhibitors displaying products and services used for designing, building, injection molding and maintaining molds.

  • Another Plant Tour at Amerimold!

    Amerimold, SPE Mold Technologies Div and SPE Detroit Section Present Hi-Tech Mold Plant Tour.

  • What’s Your HR Pain Point?

    Members of the American Mold Builders Association (AMBA) gathered together last week in a breakout session geared toward helping them bridge their HR “pain points” by sharing experiences and solutions.

Resources