DMS

1875 Blackacre Dr.
Oldcastle, ON N0R 1L0 CA

Connect

As Seen In MoldMaking Technology

Just a Few Words on Why and How We Work Through COVID-19
This mold component supplier shares its reasons for continuing to work and steps for ensuring your business remains open and operating at normal levels.

Tech Trends: Most Viewed Products of 2019, Part III
As 2019 comes to an end, see the most viewed products from throughout the year that could bring your business success in 2020.

Progressive components at Amerimold 2019

Amerimold Action 2019
Amerimold celebrated 20 years in Rosemont, Illinois, and offered attendees a wide variety of products, programs and pomp.

2019 Technology Review: Mold Components
MoldMaking Technology’s 2019 Technology Review and Sourcing Guide offers some of the latest highlighted products and services from supplier companies from a variety of categories, including mold components.

DMS at Amerimold 2019

Amerimold 2019: More Products From the Show
More highlights of moldmaking industry products from the exhibitors at Amerimold 2019.

Mastip VeriShotᵀᴹ features Mastips FlowLoc™ threaded leak proof nozzles

Featured Products from Amerimold 2019
The first in a series of slideshows providing a look at products featured during Amerimold 2019.

Amerimold 2019 Product Showcase, Part 4
Plan ahead for Amerimold 2019 with a sneak peek of some highlighted products from the show’s extensive list of exhibitors!

Cutting Sprue Bushing Enables Feeding Plastic Components Near Mold's Center
DMS adds Almo’s cutting sprue bushing to its range of edge gate cutting components.

Cutting Sprue Bushing Removes Need for Secondary Operation
DMS adds Almo’s cutting sprue bushing to its range of edge gate cutting components.

CAMM members with Windsor Rotary Club

News and Reviews from Industry Organizations, August 2018
News and reviews from the American Mold Builders Association (AMBA), the Mold Technologies Division of The Society of Plastics Engineers (SPEMTD) and Canadian Association of Mold Makers (CAMM).

Sunglasses mold made with Uddeholm’s Mirrax ESR and a pair of sunglasses

2018 Technology Review and Sourcing Guide: Mold Materials
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including mold materials.

2018 Technology Review and Sourcing Guide: Mold Components
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including mold components.

CAMM and Windsor Rotary at new Centennial Plaza

CAMM Members Contribute Skills for Windsor Rotary Centennial
Members of the Canadian Association of Mold Makers (CAMM) contributed time and skills to create sculptures for the new Rotary Club of Windsor (1918) Centennial Plaza.

Balls on Ejector Bushings Run at Angle to Increase Load Capacity
DMS showcases Bolex P ball-guided ejector bushings made of special roll steel bush casing, hardened and ground to hold fixed inside a high-resistant bronze cage for guiding the balls running along the cage.

Hasco stack-mold with standard components.

Standardization Solutions Drive Mold Component Innovations
Mold component suppliers continue to standardize products that speed mold building while also developing technology that addresses design, cooling, release and other challenges.

Alliance laser machines

Amerimold 2017: Multitudes of Metalworking Materials and Machines
Amerimold proved once again that it is THE event for moldmaking.

PowerMill CAM

SLIDESHOW: The Final Countdown to Amerimold
It’s Amerimold Eve! Our exhibitors are assembling and putting final touches on their booth displays today and there are so many new companies – plus familiar companies who have something new to show attendees. Amerimold 2017 is not to be missed.

On Display at the Windsor Mold Expo
Here is a small sampling of technology that caught my eye.

Truck Grill Mold

Case Study: Mold Components
New Manifold System Offers Quicker Delivery Times without Sacrificing Quality

mold plaque example

Simple Strategies for Providing Value-Add to Your Customers
Five technology solutions to consider that have advantages for both the mold manufacturer and its customers.

Hot runners

Lean Manufacturing Trims Leadtimes
Moldmakers aren't the only ones reducing leadtimes. Component and hot runner suppliers are delivering their equipment and supplies faster to accommodate industry demand.

Product Categories of DMS

Air Grinders
Aluminum Alloys
Blades
Bushings
Core Pins
Date Inserts
Gate Inserts
Guides
Heating Equipment
High-Speed Electric Spindles
Interlocks, or Taperlocks
Internal Mold Cooling Products
Leader Pins
Locating Rings
Mold Bases and Frames
Mounted Points
Polishing Equipment
Power and Thermocouple Cables
Process Controllers
Profilers
Reamers
Slides
Sprue Bushings
Stop Pins
Straight Locks
Support Pillars
Thermal Pin/Heat Pipes
Wear Plates