5/10/2018 | 1 MINUTE READ

Elbow Connectors Improve Flow Rates

Originally titled 'Elbow Connectors Improve Flow Rates'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Eisele Connectors presents its Liquidline and Multiline E connectors at NPE2018. 

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Eisele Connectors presents the Liquidline and Multiline connectors in booth S10088 at NPE2018. Eisele Connectors developed a product line for coolants called Liquidline, which has with optimized connections in a full range of sizes. With the Eisele Liquidline, Eisele Connectors offers an extensive line of threaded fittings and coolant connectors. Liquidline products are available in “dezincification-resistant” brass as well as in aluminium and stainless steel. In addition, Eisele Connectors has added 45° and 90° elbows to its line. The elbows are made of brass or stainless steel and are designed with optimized flow properties . Eisele Connectors says that the new, swept, screw-in elbow of dezincification-resistant brass or stainless steel achieved significantly better flow rates than conventional elbow fittings in comparative tests, since there is no turbulence and no obstruction of the flow to prevent heat dissipation. The elbows are suitable for coolant connectors in welding processes, power electronics or high-frequency induction heating systems. The improved flow rate of the elbows enables the use of smaller diameters to achieve the same cooling effect as with conventional elbow connectors.

The Multiline E is a completely new type of a modular kit system for custom modular multiple and multi-media connectors. The Eisele Multiline E series is a system for combining compressed air, vacuum, gases, coolant, liquids, electronics and electrical wiring in one base body. The Multiline series also has expanded to include an optimized housing version with a practical locking lever. The lever enables connection and disconnection within seconds. This quick-change system also requires less manual force, and Eisele Connectors says this makes it convenient to operate a Multiline E multiple connector that is completely equipped with drip-free, adaptive inserts.

RELATED CONTENT

  • Technology Tuesday: Preparing for NPE with Plastics Review

    This slideshow has you covered in plastics review with discussion on common plastics problems like sticking and warping. It includes pieces on software analysis for plastic parts, and it even includes a piece on making the most out of used plastic.

  • Tradeshow Tuesday: Are You a Moldmaker Who Exhibits and Attends Events?

    At least 40 mold builders are sharpening their marketing and trade skills at NPE2018 by participating as exhibitors. NPE2018 is a unique, specialized event that only takes place once every three years, so I wanted to make sure that mold shops have the information that they need to promote themselves and to make the most out of their investments in the show.    

  • Tradeshow Tuesday: Coming Up at NPE2018

    Cruise through this week’s slideshow to see more of what’s coming up at NPE2018.

Related Topics

Resources