8/8/2018

Seco Tools Previews IMTS Product and Service Intros

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

New Double Quattromill for face milling and other highlights shared at Mold and Die event.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Seco Tools LLC (Troy, Michigan) will unveil several new products and services at IMTS 2018 that are geared to the mold and die industry. Editors who attended the company’s Die and Mold Seminar got a sneak preview of what’s to come, including the new Double Quattromill for face milling.

“We are expanding our service offerings and we expect that the Double Quattromill will be the hero of IMTS,” Rob Keenan, president of Seco Tools, says. “A lot of research and development went into this product with impressive results.”

The 22-millimeter IC insert is designed to be especially effective for unstable machining conditions and features two lead angles of 45 degrees and 68 degrees for flexibility, large depths of cut (9 mm – 11 mm), and more. Both inserts have eight edges and positive axial rake angles with all geometries. 

Seco has also recently established its Seco Consultancy Service (SCS), a new branch intended to support customers with strategies for optimizing cutting tool usage, including manufacturing efficiency evaluations (MEE). 

Visit Seco Tools in booth number 431564 in the West Hall of McCormick Place, Chicago.

 

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Take the Plunge: Drill vs. Mill

    Strategic operation planning and cutting tool system optimization can make plunge roughing a productive, stable choice for high-volume material removal.

  • Shrink Fit: The High Accuracy Toolholder of Choice

    Requirements in the mold industry are much more precise than general machining, so more attention must be paid toward the selection of the appropriate toolholder in regards to its features and benefits.

  • Machining Molds with Negative Stock Shutoffs

    Negative stock shutoff can help you make better molds in less time. Here is a clear definition and description of the process. While the concept is fairly simple, the implementation can be challenging.

Related Topics

Resources