ASK THE EXPERT

Published 9/8/2022

MMT Ask the Expert: How to Optimize System and Hot Runner Balance

In the first portion of our “Ask the Expert” series, Husky’s Sheldon Alexander answers some frequently asked questions on the fundamentals of system and hot runner balance and how to overcome challenges. This episode is brought to you by Husky, Melt to Mold Precision.

This episode is brought to you by Husky, Melt to Mold Precision.

System balance is vital in optimizing an injection molding process and can be the limiting factor in producing high-quality parts from every cavity. In this video, Husky’s Sheldon Alexander answers some frequently asked questions on the fundamentals of system and hot runner balance and how to overcome challenges. In addition, he’ll discuss the impact of shot size, considerations for high cavitation stack molds and recent part design trends.

About Sheldon Alexander:

Sheldon is a Hot Runners and Controllers Business Manager at Husky. He has over 20 years of global industry experience, traveling the world to help optimize injection molding applications for customers in over 40 countries. He has experience managing highly skilled teams in quality assurance and aftermarket support. Sheldon also holds several patents in the industry with specific expertise in Hot Runners. Feel free to contact Sheldon at: 802-233-6737 or via email at salexand@husky.ca

Chapters:

0:00 Introduction

0:22 If there is an issue with part quality how do you check if it correlates to system balance?

1:19 What impact does shot size have on system balance?

1:56 Does Husky provide guarantees on system balance?

2:18 High cavitation stack molds and system balance

3:03 Recent part design trends that have created challenges with system balance

This episode is brought to you by Husky, Melt to Mold Precision.

Related Content

MMT Chats: Giving Back by Answering the Moldmaking Education Need

MoldMaking Technology Editorial Director Christina Fuges checks in with Bruce Cateon, an executive advisor at OASIC Consulting. Bruce started out in moldmaking, eventually becoming an industry consultant and taking time to work on his passion project the “Injection Mold Design Handbook” as a way of giving back to the industry that has given him so much. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.
MMT Chats: American Mold Builders Association on Best Practices for Employee Attraction and Hiring

MoldMaking Technology Editorial Director Christina Fuges sits down with AMBA’s Managing Director Kym Conis and the Director of Strategic Execution Rachael Pfenninger to discuss its Employee Attraction and Hiring Playbook and the Workforce Development Task Force. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.
VIDEO: Standardization and the Future of Moldmaking

Progressive Components President Glenn Starkey discusses their focus on standardization and the future of moldmaking (it’s here to stay!).

Regal Components: Custom precision mold components

New COOLED Compact Slide - Amazing Advantages

Related Content

Education 6 Dec 2022

MMT Chats: Giving Back by Answering the Moldmaking Education Need

MoldMaking Technology Editorial Director Christina Fuges checks in with Bruce Cateon, an executive advisor at OASIC Consulting. Bruce started out in moldmaking, eventually becoming an industry consultant and taking time to work on his passion project the “Injection Mold Design Handbook” as a way of giving back to the industry that has given him so much. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.

Sales 20 Dec 2022

MMT Chats: American Mold Builders Association on Best Practices for Employee Attraction and Hiring

MoldMaking Technology Editorial Director Christina Fuges sits down with AMBA’s Managing Director Kym Conis and the Director of Strategic Execution Rachael Pfenninger to discuss its Employee Attraction and Hiring Playbook and the Workforce Development Task Force. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.

Data Management Software 8 Apr 2024

VIDEO: Standardization and the Future of Moldmaking

Progressive Components President Glenn Starkey discusses their focus on standardization and the future of moldmaking (it’s here to stay!).

Safety 3 May 2022

ICYMI, MMT Chats: 30 Under 30 Honoree, Plastics Engineering TA Teaches Value of Learning and Producing Not Perfection

MoldMaking Technology Editorial Director Christina Fuges brings on UMass Lowell Plastics Engineering Teaching Assistant Michael Shone as a guest for this MMT Chat to discuss moldmaking through the lens of academia. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.