Advertisement

Millstar

What's New and What Works in Mold Manufacturing

- Engineer
- Build
- Maintain
- Manage
- All Topics
Engineer See All

Editorial Board Insight
How to Use a Disciplined Approach to Mold Simulation from the Plastics Point of View
What follows is a Q&A with Adam Narkter, MMT EAB member and Diversified Technologies International (DTI) business development manager.

3D Printing
How to Make Data Work for Mold Productivity and Performance
The use of digital workflows improves the impact of mold design libraries, conformal cooling and machine learning.

Engineer
Deliberate Mismatches for Easier Mold Manufacture and Improved Part Appearance
Basic principles for applying deliberate mismatch in the area between the core and cavity and between two matching plastic parts.

Education
Advancing Mold Design Demo: The Role of VR in Closing the Skills Gap
This Q&A and demo explain how virtual reality training tackles the skills gap by providing immersive, cost-effective learning experiences.

Industry 40
MMT Chats: Digitalizing Mold Lifecycle and Process Performance
MMT catches up with Editorial Advisory Board member Bob VanCoillie senior manager of Kenvue’s mold management center of excellence outside of Philadelphia to discuss mold management via tooling digitalization and OEM expectations and opportunities.

Case Study
ERP Empowers Mold Builder to Increase Speed, Efficiency, Accuracy
Highly integrated but easy-to-use ERP system helps Delta Mold Inc. increase unattended hours, uptime, productive labor hours and improve mold delivery times.
Build See All

Business Strategy
Triple Threat: How One Shop's Success Resonates Across Three End Markets
When I revisited Eden Tool in New Freedom, PA, this past summer for a follow-up feature on this mold builder’s growth, I underestimated the story.

Mold Materials
How to Machine Aluminum Molds to Enhance Efficiency and Quality
Ways to optimize the machining process to fully leverage the benefits of an aluminum mold.

Data Management Software
How to Manage a CAD Library
Learn five ways to organize your mold design information.

Basics
How to Implement Five-Axis Mold Machining for Higher Productivity, Versatility
Understanding the basics of five-axis capabilities justifies the investment, but exploring all the multi-axis machine benefits and approaches enhances the return on investment.

Additive Manufacturing
8 Ways the Plastics Industry is Using 3D Printing
Plastics processors are finding applications for 3D printing around the plant and across the supply chain. Here are 8 examples to look for at NPE 2024.

Additive Manufacturing
Mold Materials, 3D Printing Technologies for Next-Gen Moldmaking
As moldmaking advances, so too do the materials and processes involved in their efficient production, including these latest mold materials and 3D printing technologies.
Maintain See All

Surface Treatment
Reasons to Use Fiber Lasers for Mold Cleaning
Fiber lasers offer a simplicity, speed, control and portability, minimizing mold cleaning risks.

Maintenance & Repair
Mold Maintenance Continues to Matter: Enhanced Training Program in a New Facility
I attended a MoldTrax mold maintenance workshop in 2019 and shared my experiences, and despite changes in ownership, the workshop's remarkable value endures, as discussed in a recent Q&A with the current leadership.

FAQ
How to Implement a Remote Validation Process
A review of the setup and use of a remote mold validation kit.

Maintenance & Repair
How to Maintain Heaters, Thermocouples, Valve Gates and Controls
An examination of real-world problems and solutions involving hot runner system maintenance.

Conformal Cooling
How to Use Simulation to Achieve a High-Gloss Surface Finish
Combining simulation, conformal cooling, and a rapid heat and cooling process can predict and produce the required surface finish for high-gloss plastic parts.

Maintenance & Repair
What You Should Know About Injection Mold Safety Straps
Every mold should have one in order to be safe and OSHA compliant.
Manage See All

Editorial
Scholarship, Grant Funding Available from SPE Mold Technologies Division
With NPE happening this month, there’s no better time to discuss the scholarships and grants available to support education in plastics and moldmaking.

Business Strategy
Triple Threat: How One Shop's Success Resonates Across Three End Markets
When I revisited Eden Tool in New Freedom, PA, this past summer for a follow-up feature on this mold builder’s growth, I underestimated the story.

Workforce Development
Advancing Mold Design Demo: The Role of VR in Closing the Skills Gap
This Q&A and demo explain how virtual reality training tackles the skills gap by providing immersive, cost-effective learning experiences.

Data Management Software
MMT Chats: Digitalizing Mold Lifecycle and Process Performance
MMT catches up with Editorial Advisory Board member Bob VanCoillie senior manager of Kenvue’s mold management center of excellence outside of Philadelphia to discuss mold management via tooling digitalization and OEM expectations and opportunities.

Design & Mfg. Software
Mold Design Review: The Complete Checklist
Gerardo (Jerry) Miranda III, former global tooling manager for Oakley sunglasses, reshares his complete mold design checklist, an essential part of the product time and cost-to-market process.

Workforce Development
Aligning Your People Strategy with Your Business
Editorial Advisory Board member Marion Wells, founder of Human Asset Management discusses the why and how of developing a talent plan.
All Topics See All

30 under 30

3D Printing

Additive Manufacturing

Aluminum

amerimold

Analysis

Associations

Automation

Automotive

Auxiliary Equipment

Basics

Build

Business Strategy

Case Study

Conformal Cooling

Consumer

Cutting Tools

Data Management Software

Design & Mfg. Software

Digital Demos

Drills

Ecomonics

Editorial

Editorial Board Insight

EDM

Education

electronics

Engineer

FAQ

Five Axis

Grinding

High Speed Machining

HMC

Hot Runners

ICYMI

IMTS

Industry 40

Inspection & Measurement

jobposting

Leadership

Leadtime Leader

Machining

Maintain

Maintenance & Repair

Manage

Marketing

Medical

MMT25

Mold Components

Mold Materials

Molding Equipment

Moldmaking Conference

NPE

Packaging

Profile

PTXPO

Rapid Tooling

Regulations

Safety

Sales

Supply Chain

Surface Treatment

Sustainability

Tips

Tool Steel

Top Shops

Turning

VMC

Workforce Development

Workholding
- Webinars
- Videos
- Events
- Suppliers
- Basics/101
Webinars See All

On Demand
Using Hot Runner Balance in the Mold Qualification Process
System balance plays an important role in the optimization of an injection molding process and can be the limiting factor in the production of high-quality parts from every cavity. In this webinar, Husky will present the process fundamentals of system and hot runner balance and its impact on mold qualification. They will look at the factors that enable well-designed, balanced hot runners and the causes of unbalanced systems. Attendees will learn about the factors that influence short shot balance, how to measure system balance and how to set system balance expectations based on specific applications. Agenda: Process fundamentals of system and hot runner balance as well as impact on mold qualification How to assess the factors to balance short shot factors How to measure system balance How to set up balance expectations

On Demand
Design for Maintenance: Five Tips to Extend Tool Life and Simplify Maintenance
Want to extend tool life? You need a design for maintenance approach. Incorporating design for maintenance into your tooling process can help you reduce running maintenance costs, enhance part quality and reduce the risk of human errors. In this webinar, you'll learn five essential tips for getting started with design for maintenance. Plus, discover how Canon Virginia, Inc.'s mold maintenance planning process and tooling solutions can add value to your business. Agenda: Understand business and technical values of design for maintenance and maintenance planning Learn five tips for design for maintenance you can put into practice today Adopt Canon Virginia, Inc.'s mold maintenance planning process and tooling solutions

On Demand
Unlocking the Potential of Polycarbonate: Best Practices for Successful Injection Molding
In today's manufacturing landscape, it's common to be tasked with doing more with less. You rely on a combination of factors to mold smaller parts with greater precision to satisfy growing demands and higher production levels — all within a smaller space. In this context, polycarbonate has become a popular material for modern products and injection molding applications. Manufacturers and designers increasingly select polycarbonate for its high impact resistance, stiffness, optical clarity, light weight and dimensional stability. Because polycarbonate is an engineering resin, it requires more care and attention in processing than commodity resins. How are leading manufacturers leveraging polycarbonate and skill base to meet their production and business objectives? Agenda: The properties that make polycarbonate an attractive choice for material selection Considerations for part design Best practices for processing equipment and functionality — from pellet to final part How to troubleshoot defects Case studies and examples of success using polycarbonate

On Demand
Embracing Additive Manufacturing for Conformal Cooling
Injection molding is one of the most widely used manufacturing methods due to its ability to produce high-quality parts at incredibly high volumes. However, the productivity of these processes is often limited by the cooling methods that removes heat from the part after molding. Advancements in additive manufacturing (AM) techniques have opened the door for new approaches suitable for production molding. Modern conformal cooling approaches achieved through these AM techniques offer the potential for breakthrough solutions. This webinar will explore the cutting-edge advancements in these technologies that enable the design and production of intricately-tailored cooling channels within injection molding tooling. During this session, SyBridge Technologies will discuss its approach to design, simulate and test novel cooling structures to improve injection molding tooling performance from cycle time to warp.

On Demand
Optimizing Thermal Management in the Molding Process
DME will highlight the factors that can reduce thermal transfer over time and cause the mold temperature to stray beyond its established control limits—making it difficult to control the molding process. Recommendations are shared on how to best maintain the thermal transfer coefficient through the implementation of specific predictive maintenance measures.

On Demand
Cost-Effective Metal Part Production: Metal 3D Printing Cost Comparison
It has a reputation for being expensive, but it that a true apples-to-apples comparison? And how does the equation change if metal 3D printing is being evaluated as a complementary (instead of competitive) method? Join FreeFORM Technologies and Desktop Metal for this webinar exploring how metal 3D printing compares to traditional manufacturing methods through a detailed comparison of metal injection molding and metal binder jetting. With both technologies in-house, FreeFORM is positioned to discuss the advantages and disadvantages of traditional versus additive manufacturing methods. Together, both companies will walk through cost modeling to discover where the breakeven is on volume and cost that makes metal 3D printing cost-effective. Agenda: Learn where binder jetting fits and how it supports the product lifecycle curve as production ramps and declines throughout a product lifecycle Explore the factors that impact cost breakdowns (such as material and tooling) and provide examples to compare costing models at various production volumes of each method Compare the design considerations, process steps and end-part material properties

5 Jun 2024 New & Upcoming
Demystifying Flow Analysis: Advancing Plastic Injection with Smart Manufacturing Register Now
Videos See All

Workforce Development
Mold Technologies Division of SPE Announces 2024 Award Recipients at NPE 2024
The Mold Technologies Division of the Society of Plastics Engineers (SPE) honored recipients of four awards at NPE, recognizing excellence in moldmaking and supporting the next generation with a new Apprentice of the Year award. Each winner receives a $1,000 stipend for their training program.

Business Strategy
Advancing Mold Design Demo: The Role of VR in Closing the Skills Gap
This Q&A and demo explain how virtual reality training tackles the skills gap by providing immersive, cost-effective learning experiences.

NPE
Dynamic Tool Corp. Wins MoldMaking Technology’s 2024 Leadtime Leader Award
Dynamic Tool Corp., a provider of engineered tooling solutions based in Menomonee, Wisconsin, has been awarded MoldMaking Technology’s prestigious 2024 Leadtime Leader Award. The announcement was made during a live awards ceremony at the Plastics Technology booth, where owners Steve and Ken Eberle accepted the award on behalf of their team.

Packaging
MMT Chats: Digitalizing Mold Lifecycle and Process Performance
MMT catches up with Editorial Advisory Board member Bob VanCoillie senior manager of Kenvue’s mold management center of excellence outside of Philadelphia to discuss mold management via tooling digitalization and OEM expectations and opportunities.

Leadership
3 Es of Small, Family-Owned Mold Shop
Isaac Trevino, Business Development Manager, with Best Tool & Engineering is a mechanical engineer and entrepreneur at heart. In this interview, he talks about working in the business of moldmaking, evaluating ERP solutions, making partnerships to train the next generation and managing expectations.

Who is Our 2024 Leadtime Leader Winner?
Our Leadtime Leader Competition has been an ongoing award since 2003. It is a prestigious award given only to North American mold builders who excel in moldmaking. Find out when and where you need to be for the reveal. Sponsored by Progressive Components.
Events See All

9 Sep 2024
IMTS 2024

10 Sep 2024
Parts Cleaning Conference at IMTS 2024
Debuting in 2010, the Parts Cleaning Conference is the leading and most trusted manufacturing and industrial parts cleaning forum focused solely on delivering quality technical information in the specialized field of machined parts cleansing. Providing guidance and training to understand the recognized sets of standards for industrial cleaning, every year the Conference showcases industry experts who present educational sessions on the latest and most pressing topics affecting manufacturing facilities today. Discover all that the 2022 Parts Cleaning Conference has to offer!

12 Sep 2024
AM Workshop - 3D Printing for Job Shops
Presented by Additive Manufacturing Media, Plastics Technology and MoldMaking Technology, the 3D Printing Workshop at IMTS 2024 is a chance for job shops to learn the emerging possibilities for part production via 3D printing and additive manufacturing. First introduced at IMTS 2014, this workshop has helped hundreds of manufacturing professionals expand their additive capabilities.

8 Apr 2025
Formnext Chicago 2025
Formnext Chicago is an industrial additive manufacturing expo taking place April 8-10, 2025 at McCormick Place in Chicago, Illinois. Formnext Chicago is the second in a series of Formnext events in the U.S. being produced by Mesago Messe Frankfurt, AMT – The Association For Manufacturing Technology, and Gardner Business Media (our publisher).
Suppliers See All

Additive Manufacturing

Automation

Business Development & Strategies

CAD/CAM and Other Software

Cutting Tools and Toolholders

EDM Equipment and Supplies

Hot Runner Systems and Supplies

Inspection & Measurement

Machining Centers and Machine Tools

Maintenance, Repair and Surface Treatment

Mold Components

Mold Materials

Moldmaking Equipment and Accessories

Molds/Tools/Dies

Services
Basics/101 See All

Basics
How to Customize an Interoperable Software Solution for Your Moldmaking Process
A connected software solution streamlines the moldmaking process by providing a unified source of design data, enhancing efficiency and reducing errors, with five key steps benefiting from this integration.

Machining
How to Implement Five-Axis Mold Machining for Higher Productivity, Versatility
Understanding the basics of five-axis capabilities justifies the investment, but exploring all the multi-axis machine benefits and approaches enhances the return on investment.

Maintenance & Repair
Mold Maintenance Continues to Matter: Enhanced Training Program in a New Facility
I attended a MoldTrax mold maintenance workshop in 2019 and shared my experiences, and despite changes in ownership, the workshop's remarkable value endures, as discussed in a recent Q&A with the current leadership.

Molding Equipment
How to Implement a Remote Validation Process
A review of the setup and use of a remote mold validation kit.

Automation
How to Build the Right Automation System
Seven considerations when developing an automation solution for your customers.

FAQ
Machine Tool Considerations for Today's Mold Builder
Machine rigidity, spindle speed, power and control options that run complex programs smoothly are vital to meet the industry’s surface finish and speed requirements.
Magazine
MMT Chats
Leadtime Leaders
Subscribe

Home
Suppliers
Intex Tooling Technologies

Intex Tooling Technologies

AS SEEN ON MMT

230 Edward St.
Aurora, ON L4G 3S8 CA
289-840-1095
intextooling.ca

IS THIS YOUR COMPANY?

UPDATE YOUR LISTING SUBMIT A PRESS RELEASE TO OUR EDITORIAL TEAMS

As Seen On MoldMaking Technology

Technology and Sourcing Guide 2023: Mold Builders

MMT Chats: Composites, Putting Material Only Where You Want It and the Impact on Tooling

MMT Chats: Moldmaker Apprentice Listens and Learns to Lead

How a Mold Builder Can Implement Industry 4.0

MMT Chats: 5 in 5 with Intex Tooling Technologies

2020 Sourcing & Technology Guide: Service Providers

MMT Chats: Remoting, Reaching Out and Ramping Up Recyclable PPE

2018 Technology Review and Sourcing Guide: Hot Runners

Tradeshow Tuesday: On Display at Amerimold 2018, Part 3

Boutique Services Focus on Customer Experience and Quality

VIEW ALL ARTICLES

Intex Tooling Technologies Supplies the Following Products

Editorial, News, and Products

Advertisement

Kor-Lok

Advertisement

New COOLED Compact Slide - Amazing Advantages

Advertisement

Millstar

Advertisement

Moldmaking Solutions

Advertisement

The Automated Shop Conference

Advertisement

Regal Components: Custom precision mold components

Advertisement

Graphite Selection Assistance

Advertisement

MMT Today enews