Mold Flow and Simulation

Exploring the: Mold Flow and Simulation Zone

15 Results for: Case Study

Sort by:
Published: 5/1/2013

Training Initiative’s "Mold VS Machine" Approach Boosts Moldmaker/Molder Relationship

“Understanding mold design helps molders understand the limitations as well as the possibilities in mold design. Molders can ask constructive and critical questions with knowledge, and also conjure recommendations and make suggestions for improving ...

Published: 12/1/2012

Training for More Efficient Cold Runner System Design

“The training I received from Beaumont taught me how to evaluate different runner design options for a given mold.”

Published: 2/1/2011

Collaboration Leads to Complete Turnkey System

To meet the special needs of this project, ICU, Husky and Tech Mold worked together to design a complete turnkey system—including machine, mold, hot runner and temperature controller.

Published: 12/7/2010

Mold Cooling Breakthroughs

“Radical” is not a word one expects to hear from a plastic injection molding company.

Published: 5/1/2009

Perfecting the Moldmaking Process

One mold manufacturer’s secret to staying ahead: obtaining a full understanding of the entire molding process by cutting and shooting molds in their own shop, and investing in today’s machining technology to strengthen a niche in com...

Published: 8/1/2008

Multi-Cavity Mold Issues Solved with Melt Rotation Process

Toolroom supervisor shares his experience with a rheological control solution to some obvious and some not-so-obvious challenges with product and color variations in a multi-cavity mold.

Published: 8/1/2008

Moldmaker Uses a Solution-Based Approach To Mold Flow Analysis

MoldFlow consulting firm assists mold shop as it approached a complex molding program for its customer, Cessna Aircraft Company.

Published: 4/1/2008

Staying Competitive Using Mold Flow Analysis

The pressure on the supply chain is unrelenting for all things faster, better and cheaper. For moldmakers, getting molds built right the first time is critical to meeting these increasing demands. But how?

Published: 3/1/2008

Tandem Mold Technology Trims Production Costs

A process has been developed that uses a mold with two parting levels, which alternately open.