Mold Components

Exploring the: Mold Components Zone

197 Results for: Product

Sort by:
Published: 4/25/2017

Core Unscrewing Device Provides Core Positioning Accuracy

Superior Die Set will showcase its Threadformer core unscrewing device, which uses a powerful hydraulic motor and a fixed mechanical dead stop to achieve core positioning accuracy.

Published: 4/17/2017

Bronze, Steel Wear Strips Can Be Customized

SelfLube will showcase its bronze and steel wear strips, which can be ordered to specification with customized shapes, sizes, cut-outs, pockets, hole patterns, chamfers and more.

Published: 3/29/2017

Components Feature 3D-Printed Conformal Cooling

Developed in partnership with Linear AMS (a Moog company), TruCool solutions from Milacron’s DME brand are highly complex mold cavities, cores and components with conformal cooling channels produced using direct metal laser melting.

Published: 3/28/2017

Shoulderless Guide Bush Can be Axially Secured

Hasco’s Z11 guide bush has no shoulder, making is suitable for use when there is no supplementary mold plate for axially securing the bush or if the plate in which the bush sits makes an additional demolding movement, as in the case of molds with st...

Published: 3/27/2017

Small Cavity Pressure Sensors Offer Flexible Installation

RJG’s 6-mm cavity pressure sensor is designed for high-cavitation molds with small, tightly packed ejector pins.

Published: 3/21/2017

Lifters Available in Smaller Rack Size

With an ejection stroke ranging to 100 mm, CUMSA’s DR16 offers the smallest rack size of the company’s Double Rack (DR) series of lifters, allowing release of undercuts ranging to 33 mm.

Published: 3/20/2017

DLC-Coated Latch Locks Suited for Cleanroom Applications

Meusburger E 1820 flat and E 1840 round latch locks are designed for controlling and secure locking of the floating plate in three-plate molds.

Published: 3/14/2017

Flat Guide Jaw Boosts Process Reliability

Used in combination with the Z18 guide block, Hasco’s Z190 guide jaw is designed to precisely guide and center tools, resulting in high reliability in injection molding processes.

Published: 2/3/2017

Cylinder Allows In-Mold Pin Adjustment

At Plastec West / MD&M West, February 7-9, in Anaheim, California, Incoe will display its small, hydraulically actuated HEM cylinder, which allows the shut-off valve pin to be adjusted in the mold without removal of the mold top clamp plate.

Published: 2/1/2017

Caring for Hydraulic Cylinders

Preventive maintenance on these important components will help keep a mold running.