Thermoplay S.P.A.

Via Carlo Viola, 74
PONT SAINT MARTIN, 11026 IT

Connect

As Seen In MoldMaking Technology

Mold and Hot Runner Technology Combines Temperature and Process Control
Barnes Molding Solutions’ brands will be presenting mold and hot runner technologies at K 2019.

Tech Trends: K 2019 Sneak Peek, Part 4
Here’s just a quick sneak peek at some of products exhibitors like Husky, Frigel, Barnes Molding Solutions brands and Hasco will be displaying in their booths at K 2019.

2018 Technology Review and Sourcing Guide: Hot Runners
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including hot runners.

Thermoplay mini valve-gate nozzle

Compact Nozzle Enables Injection on the Inside Surface of Part
Thermoplay displays its newly expanded small nozzle series featuring the valve gate F mini nozzle, Ø11 at NPE2018.

AMBA Chicago Supplier Night 2018

Successful Supplier Nights Help "Mold" Careers
The Chicago Chapter of the American Mold Builders Association (AMBA) recently hosted its fourth successful supplier night fundraiser that continues to provide much-needed support for promoting careers in moldmaking.

injection molding

Technology Tuesday: Hot Runners and Mold Components
This week’s Tech Tuesday blog brings readers a review of several products announced during the last few weeks, namely hot runner and mold componentry.

Thermoplay DL-8B and DL-1B nozzles

Small-Tip Nozzles Suited for Edge-Gate Injection
Thermoplay’s DL-8B and DL-1B nozzles are designed for edge-gate injection when injection points are located in critical positions and the shape of the part to be molded requires use of a small tip.

K 2016

SLIDESHOW: Technology Showcase, After K
By all accounts K 2016 was a success. According to show management, attendees were delighted with the wealth of new technical developments presented by raw materials producers, machinery manufacturers and producers of semi-finished and technical parts. Here are some technology highlights.

HEM Miniature Hydraulics

Technology Showcase, Hot Runners and Mold Components
Take a look at this week's slideshow to see products that make building and/or maintaining molds more efficient and cost-effective.

emerald hot runner

Slideshow: Hot Runner Technology
Check out a few of the latest products in hot runner technology.

Thermoplay hot runner manifold

Manifold Design Features Compression-Seated Nozzles
Thermoplay has developed a hot runner manifold that features balanced flow channels and has nozzles seated to it by mechanical compression, enabling them to be always centered within the mold cavity and reducing wear in the coupling zone.

Thermoplay hot runner system

Hot Runner System Nozzles Screw into Manifold
Designed for molding of large parts, Thermoplay offers a hot runner system in which the nozzles are screwed into the manifold at various inclinations, guaranteeing ideal perpendicularity for injection.

Product Categories of Thermoplay S.P.A.

Hot Halves
Hot Runner Manifolds
Hydraulic Valve Gate Nozzles
Pneumatic Valve Gate Nozzles
Temperature Controls, Monitors, Sensors
Valve Gate Controllers
Valve Gate Sequencers