Polyshot Corporation

75 Lucius Gordon Dr.
West Henrietta, NY 14586 US


As Seen In MoldMaking Technology

2018 Technology Review and Sourcing Guide: Hot Runners
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including hot runners.

Hot Runners Designed to be User-Friendly, Reliable
Polyshot Corp. manufactures hot runner systems that are designed to be user-friendly and reliable.

multi tip hot runner nozzles

Slideshow: NPE2015
Check out some of the technology that was featured at this year's event.

Single-Nozzle Valve Gate Handles High-Temp Resins
At NPE2015, Polyshot featured its compact Single Nozzle Valve Gate (SNVG), designed for direct valve gating of virtually all resins, including high-temperature PEEK and Ultem.

Conformal Cooling Conference Review
The inaugural launch of the first Conformal Cooling Conference on Sept. 17 in Troy, Michigan, was a success with 32 attendees that came from as far west as California and as far east as Rhode Island, and from Canada.

Self-Contained Valve Gate System Offers High Pin Force
Well-suited for cleanroom and high-temperature applications, Polyshot’s single-nozzle valve gate system offers high pin force of 400 lbs to process both filled and unfilled commodity resins.

mold cores

Mold Cooling Options
A look at three options for integrating conformal cooling into a core or cavity with an emphasis on vacuum brazing.

Vacuum Brazing Services
vacuum brazing

Fusing Cores and Cavities
A plate fusion technology that joins manifold plates for hot runner construction is now available to molders and moldmakers to allow them to manufacture conformally-cooled mold cores and cavities. It is said to reduce cycle times in injection molds as much as 60 percent. I thought I'd share some background information as well as some frequently asked questions.

powdered metal technology

Powdered Metal Technology Creates Opportunities
PMT is an injection molding process that can produce precision mold cavities at high volumes with high repeatability.

Manifold Rental
Manifold rental

Polyshot to Sell Plasel's Unique Injection Molded Mold Cavities in North America
Israeli Company's Innovative Moldmaking Technology Delivers High Repeatability and Precision in High-Cavitation Applications.

Two-Shot Hot Runner System
Polyshot Corporation (West Henrietta, NY) released its next generation, two-shot hot runner system.

The growth rate in the data for U.S. output of Medical Equipment and Supplies

Complex Parts Put a Premium on High-Tech Mold Design
Equipment and component suppliers are developing a range of products for advanced moldmaking needs.

Figure 1

Plate Fusing Technology For Designing and Building Manifolds
How plate fusing technology can benefit the mold designer/moldmaker.

Figure 1

FEA of Hot Runners to Optimize Mold Design
Optimization of a mold design with a hot runner system can be done with CAE simulations.

Hot runner calculator.

How to Justify Your Hot Runner Purchase
Four questions to help with hot runner justification.

Product Categories of Polyshot Corporation

Hot Halves
Hot Runner Manifolds
Hydraulic Valve Gate Nozzles
Mechanical Valve Gate Nozzles
Mold Flow and Simulation Software
Pneumatic Valve Gate Nozzles
Temperature Controls, Monitors, Sensors
Thermal Edge Gate Nozzles
Thermal Hot Tip Nozzles
Thermal Multi-Gate Nozzles
Valve Gate Controllers
Valve Gate Sequencers