MHS - Mold Hotrunner Solutions

60 Armstrong Ave.
Georgetown, ON L7G 4R9 CA

Connect

As Seen In MoldMaking Technology

K Show Report: Next-Level Efficiency and Control
With a show as big as K 2019 with more than 3,000 exhibitors from 63 nations, you may think that identifying a theme among all the technology would be difficult, but after all is said and done, two words come to mind: efficiency and control.

2019 Technology Review: Hot Runners
MoldMaking Technology’s 2019 Technology Review and Sourcing Guide offers some of the latest highlighted products and services from supplier companies from a variety of categories, including hot runners.

High-Cavitation Hot Runners with Valve Gates
Advanced valve gate technology gives molders more control, better part quality and higher process efficiency.

Westfall Technik Purchases MHS Hotrunner Solutions
Purchase Adds Industry-Leading Micro Molding Technology and Hot Runner Capabilities

MHS valve gate actuators

Valve Gate Actuators Built Without O-Rings to Withstand Wear
Mold Hotrunner Solutions Inc. (MHS) valve gate actuators are built entirely without o-rings so that they can withstand being worn out by force or heat, even at temperatures of 850°F.

2018 Technology Review and Sourcing Guide: Hot Runners
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including hot runners.

Uddeholm Mirrax ESR steel

Tradeshow Tuesday: Coming Up at NPE2018
Cruise through this week’s slideshow to see more of what’s coming up at NPE2018.

MHS M3-D08 micro-injection molding machine.

Micro-Injection Molding Machine Direct Gates Small Parts
MHS says that the M3 is the only dedicated micro-injection molding machine capable of producing small, direct-gated plastic parts on a large scale.

MHS hot runner solutions selection guide

Don't Get Burned ... with the Wrong Hot Runner System
The type of hot runner system you put in your mold will impact performance as much as the engine in your car determines how you’ll drive and how many headaches you’ll have down the road. Here are five questions to ask that may help ease the decision-making process.

Internal valve gate nozzle.

Benefits of the Internal Valve Gate
Not everyone is familiar with how internal valve gate nozzles work and when to use them.

injection molding work cells

SLIDESHOW: Technology Showcase, Amerimold Product Showcase
This is our industry’s show, and this week we bring you yet more previews of what you can expect to find as you walk the aisles of the biggest Amerimold Expo yet.

Fast Heat MoldChecker

Common Sense Innovation and Moldmaker Collaboration
As I walked the aisles of NPE last month, taking in all the plastics-related technologies and solutions on display, two obvious trends emerged: logical innovation and moldmaker collaboration.

conventional valve gate hot runner

No More Cooling Required
Moldmakers and molders can increase mold uptime using today’s cooling-free valve gate actuators.

Stack Mold Technology
See Us at Booth #2893

Front-removable nozzle heaters

It Pays to Take a Close Look at Your Hot Runner Warranty
As innovative companies push hot runner technology forward, a solid warranty can provide the insurance you need to switch to a better hot runner supplier.

Figure 3

Hot Runner Stack Molds: A Great Cost-Cutting Solution
How to choose the right manifold system for your stack molds.

Product Categories of MHS - Mold Hotrunner Solutions

Consulting Services
Hot Halves
Hot Runner Manifolds
Hydraulic Valve Gate Nozzles
Mechanical Valve Gate Nozzles
Pneumatic Valve Gate Nozzles
Prototype/Short-run/Injection Molding Services
Temperature Controls, Monitors, Sensors
Testing/Analysis Services
Thermal Edge Gate Nozzles
Thermal Hot Tip Nozzles
Thermal Multi-Gate Nozzles
Valve Gate Controllers
Valve Gate Sequencers