Meusburger US, Inc.

8720 Red Oak Boulevard
Suite 226
Charlotte, NC 28217 US

Division
Standard Molds

Connect

As Seen In MoldMaking Technology

Amerimold 2019 Product Showcase, Part 4
Plan ahead for Amerimold 2019 with a sneak peek of some highlighted products from the show’s extensive list of exhibitors!

DLC-Coated Flat Guiding Stock Offers Optimal Sliding Properties
The E 3174 flat guiding stock from Meusburger offers optimal sliding properties and minimal wear because of the diamond-like carbon (DLC) coated surface.

Meusburger Appoints New Managing Director
Michael Winship has been appointed as the new Managing Director of Meusburger US as of April 1.

DLC-Coated Flat Guiding Stock Offers Optimal Sliding Properties
The E 3174 flat guiding stock from Meusburger offers optimal sliding properties and minimal wear because of the diamond-like carbon (DLC) coated surface.

New Meusburger stainless-steel components.

Tooling: New Mold Components at Fakuma Show
Automatic safety locks, mold status indicators, hose manifold blocks, online ejector configurators, and new flexible lifters.

Meusburger E 3310 TT-Slide

New Mini Mold Components
At Fakuma, Meusburger went “small” with its two newest standard mold components.

gear unit

Gear Unit for Stack Molds Increases Output and Precision
With so much happening in a busy show year between NPE2018, Amerimold 2018 and IMTS 2018, MoldMaking Technology is revisiting some of the technology that was on display. In case you missed it: Meusburger’s gear unit for stack molds doubles output capacities while also offering higher precision and stability. The company had the gear unit on display at Amerimold 2018.

Meusburger stamps

Latch Function on Stamp Prevents Movement on Arrow Inserts
Meusburger says that its stamps have a latch function that fixes the arrow insert into defined positions and guarantees that the arrow remains in a fixed position.

Meusburger and Segoni shake hands on partnership

Meusburger Group Takes Over Segoni
Meusburger Group will be taking over Segoni. The software specialist will continue as an independent enterprise and all employees will be retained.

2018 Technology Review and Sourcing Guide: Mold Components
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including mold components.

Tradeshow Tuesday: On Display at Amerimold 2018, Part 6
Amerimold 2018 is only two weeks away, so check out this week’s slideshow of items to see some of what will be on display at the show.

Meusburger E 3064 guide for inclined pin

Guide Makes Optimal Surface Contact with Pin to Absorb Force
Meusburger developed the E 3064 guide for inclined pin to address the challenge of the inclined surface machining of the guiding hole in the slide.

Meusburger gear unit for stack molds

Tradeshow Tuesday: On Display at Amerimold 2018, Part 2
Amerimold 2018 is only 43 days away! Plan ahead by checking out this week’s slideshow, which highlights some of what will be on display at the show.

Hasco stack-mold with standard components.

Standardization Solutions Drive Mold Component Innovations
Mold component suppliers continue to standardize products that speed mold building while also developing technology that addresses design, cooling, release and other challenges.

Meusburger E 3064 guide for inclined pin

Guide for Inclined Pin Enables High-Force Absorption
Meusburger developed the E 3064 guide for inclined pin to address the challenge of the inclined surface machining of the guiding hole in the slide.

E 1307 fine centering units from Meusburger

Tradeshow Tuesday: Gearing Up for NPE2018
Cruise through this week’s slideshow for a peek at some of what will be on display at NPE2018.

Meusburger e13070 and E13076 centering unit.

Flat Centering Unit Enables High-Precision Centering of Inserts
Meusburger designed its E 1307 centering installs with minimum space, providing inserts with maximum space utilization within the insert.

E 6350 gas springs

Gas Springs Have Rings for Easy Identification of Initial Force
Meusburger expands its range of gas springs to include the E 6350, which has a compact design.

E 13076 and E 13070 fine centering units

Centering Unit Is Flat for High-Precision Centering of Inserts
Meusburger designed its E 1307 centering installs with minimum space, providing inserts with maximum space utilization within the insert.

E 6350 gas springs

Technology Tuesday: The Latest Products
Cruise through this week’s Technology Tuesday slideshow to see some of the latest products.

VDWF Tour Voll Wild Germany

Four European Countries in Three Days
The German Association of Tool and Mould Makers‘ (VDWF) networking event for young entrepreneurs took around 40 moldmakers on a three-day trip around Lake Constance in October 2017 to visit OEMs and innovative mold shops in Germany, Austria and Switzerland.

Product Categories of Meusburger US, Inc.

Air and Hydraulic Cylinders
Air Grinders
Aluminum Alloys
Blades
Books, Publications, Online Resources
Bushings
Cooling Systems
Copper Electrodes
Core Pins
Counters
Cutting Fluids
Cutting Tools
Date Inserts
Ejector Pins, or "Knock-out Pins"
Electrodes
Fixtures
Gaskets
Gate Inserts
Gears
Graphite Electrodes
Guides
Heat Treating Services
Interlocks, or Taperlocks
Internal Mold Cooling Products
Jigs
Leader Pins
Lifters
Locating Rings
Mold Bases and Frames
Mold Insulation
O-rings
Quick Mold Change Systems
Slides
Socket Head Cap
Sprue Bushings
Stop Pins
Straight Locks
Support Pillars
Tool Steel/Mold Steel
Wear Plates