HRSflow

920 74th Street
Byron Center , MI 49315 US

Division
Inglass U.S.A.

Connect

A Message from HRSflow

Company Profile

HRSflow, a division of INglass S.p.A., is a global company that designs and manufactures hot runner systems for all markets in plastic injection molding.

Your reliable partner for all your challenging applications

HRSflow designs and manufactures innovative hot runner systems for the injection molding industry which are used for demanding applications in the automotive, domestic appliances, technical applications, houseware, logistics & environmental segments.

FLEXflow Family: The Electrical Future You Would Never Have Expected

The electrical world at a glance: simple, safe and clean The future has arrived and it is electric.

As Seen In MoldMaking Technology

Alba Enterprises Relocated NA Headquarters, Opens New Facility

Alba Enterprises Relocated NA Headquarters, Opens New Facility
New production, service and training facility in Loveland, Colorado, ramps up 3D modeling and mold sampling capabilities in order to deliver comprehensive, multidisciplinary guidance solving application needs.

Hot Runner Technologies Benefit Performance and Flexibility

Hot Runner Technologies Benefit Performance and Flexibility
HRSflow has developed advanced hot runner technologies like the precise HyFlow, the wear-resistant Hyper-GF and the flexible FLEXflow Evo film injector.

HRSflow Constructs New European Production Site

HRSflow Constructs New European Production Site
Designed according to lean manufacturing criteria, the new site will guarantee an increase in production capacity and gain more flexibility for HRSflow clients in the European market.

Servo Valve Gate System Advances Injection Molding Process Control

Servo Valve Gate System Advances Injection Molding Process Control
Electrically driven, HRSflow’s Flexflo Evo technology is a ready-to-install system, specifically designed to set and monitor the valve pin position during the injection process.

How to Use Servos and Sensors to Advance Process Control
A servo and sensor combination that makes the mold the machine presents opportunities to advance process control.

HRSflow is Global Market Leader for Automotive Hot Runner Systems

HRSflow is Global Market Leader for Automotive Hot Runner Systems
Since the fourth quarter of 2019, HRSflow has been the number one worldwide in the field of hot runner technology for automotive applications.

Pneumatic Cylinders Install Without Removing the Hot Runner

Pneumatic Cylinders Install Without Removing the Hot Runner
HRSflow announces its extended portfolio of compact and small cylinders which require limited installation space.

Connect & Learn at Molding 2020

Connect & Learn at Molding 2020
With Molding 2020 only a couple weeks away, catch up on who will be attending and what you can learn from this educational conference.

Noteworthy News: Teaming Up

Noteworthy News: Teaming Up
Catch up on the latest business partnerships within the moldmaking community from Hurco Companies, Inc., iD Additives, Inc., PCS Company, RJG and HRSflow.

Workflow and Quality Count

Workflow and Quality Count
A recent visit to a hot runner systems and solutions provider proved the importance of workflow and quality to a production facility’s layout.

Partnership Advances Process Control Using In-Mold Sensors

Partnership Advances Process Control Using In-Mold Sensors
RJG and HRSflow have partnered up to provide an advanced process control solution, specifically for servo valve gate technology or independent cavity control.

K Show Report: Next-Level Efficiency and Control
With a show as big as K 2019 with more than 3,000 exhibitors from 63 nations, you may think that identifying a theme among all the technology would be difficult, but after all is said and done, two words come to mind: efficiency and control.

Additional Control Unit Not Required for Hot Runner Technology
At K 2019, challenging state-of-the-art applications of HRSflow’s FLEXflow hot runner technology will be presented at several booths of partnering machine producers.

Hot Runner Technologies Improve Injection Molding Process
At K 2019, HRSflow will present challenging applications of its FLEXflow hot runner technology with recent developments targeted to improve the injection molding process.

Cylinder Design Eliminates Need for Water Cooling Actuators
The new HRScool cylinder design from HRSflow eliminates the need for water cooling of the corresponding actuator due to the twice optimized temperature management system.

Tech Trends: K 2019 Sneak Peek, Part 3
Not only will K 2019 be hosting discussions on hot industry topics, but it will be exhibiting products from exhibitors like HRSflow, CUMSA USA and Hasco.

Tech Trends: K 2019 Sneak Peek, Part 1
Though K 2019 is only a month away, we here at MoldMaking Technology want to give you a sneak peek at the types of products you’ll see from its exhibitors, right here.

Tech Trends: Runner Round Up
Take a look at some highlighted hot runner products, which can help your business’s production needs through shortened design and production times, warpage reduction, easy installations, varying levels of user controls and greater application flexibility.

Hot Runner Nozzles Suitable for Small Technical Components
HRSflow presents its small-sized SA series hot runner nozzles for injection molding small technical components with a very compact cut-out in the tool.

Amerimold 2019 Product Showcase, Part 3
Plan ahead for Amerimold 2019 with a sneak peek of some highlighted products from the show’s extensive list of exhibitors!

Flexflow technology for automotive door panels from HRSflow.

Family Mold Ensures Flawless Finishes
HRSflow presents its Flexflow technology family mold for one-shot production of three high-quality parts for a door module.

Product Categories of HRSflow

Hot Halves
Hot Runner Manifolds
Hydraulic Valve Gate Nozzles
Pneumatic Valve Gate Nozzles
Servo Valve Gate Nozzles
Temperature Controls, Monitors, Sensors
Thermal Hot Tip Nozzles
Valve Gate Controllers
Valve Gate Sequencers