HASCO America, Inc.

270 Rutledge Rd. Unit B
Fletcher , NC 28732 US

Connect

Stack mold components, standard gear box and rack unit.

Stack molds are a technically and economically advantageous alternative to bigger machines and molds. With the new HASCO components – the gear housing Z 1545 /. . . and the rack unit Z 1547/. . . Stack molds of this type can be constructed simply and reproducibly. Using stack moulds doubles production capacities for the same size of mold and makes for more efficient machine utilization.

Special Features

– Low height, permitting smaller distances between tie bars on the machine

– Use of high-quality material to achieve high opening forces

– DLC-coated slideway

– Module 5 teeth gears for high force transmission

– Standard components available from stock

– Calculable manufacturing costs

Either two or four units must always be mounted symmetrically on the mold. The combination of gear housing Z 1545 /. . . and rack unit Z 1547/. . . permits an additional parting plane in the mold. The number of cavities and production output can thus be doubled for the same mold size.

A Message from HASCO America, Inc.

Company Profile

HASCO - The Original The invention and patenting of its modular mold system in 1960 made HASCO a pioneer of modern moldmaking.

Z1780 Z1782 Round Latch Lock

Defined movement and latching On complex injection molds or die-casting tools, sometimes a second parting plane or an additional demolding plane is necessary, for example on three-plate molds or molds with dual ejector assemblies.

New Slide Range Z18140

New HASCO slide unit range Z18140/…, complex and flexible In most cases, demanding injection molded parts with undercuts or recesses cannot simply be demolded in the principal demolding direction.

New HASCO safety couplings Z80700HT/... – Z80801HT/…

With its new safety couplings Z80700HT/... to Z80801HT/... HASCO has set a milestone in safety standards for mold temperature control.

Brass Spiral Cooling Cores Z960 Z9610

New Brass spiral cooling cores direct replacement/exchange for the aluminum or plastic partners for your existing molds.

New HASCO Single Shot H6300/… nozzle

The HASCO nozzle range has now been extended by the highly efficient, yet still particularly low-cost, Single Shot nozzle series.

As Seen In MoldMaking Technology

Upcoming SPE Mold Technologies Division Discussion Confronts the Challenge of Supporting Next-Generation Moldmakers
Do you find it challenging to hire new designers, engineers or moldmakers for your company? Attend “The Skilled Workforce Challenge,” on April 8, 2021, at 8 a.m. EST for global perspectives and insights on the industry’s top challenge.

Thermal Protection Hose Enhance Occupational Safety
A braided textile glass fiber and a silicone foam coating meets injection mold temperature control requirements, improved mechanical properties and ease of use.

Wedge Lock Washers Reliably Secure Screw Connections
Hasco America zinc-coated wedge lock washers Z693 use tension instead of friction to avoid loosening bolts during intense vibrations or heavy loads.

Hot Runner Unit Presents High Precision Control
The Hasco Primezone H1281 hot runner control unit includes an ergonomic interface and comprehensive diagnostic functions.

Giving Mold Builders Additive Capabilities, Super Creativity
I saw my first 3D-printed hot runner manifold at K 2019 in Germany, but the system did not have a name yet.  Fast forward to 2020 and it not only has a name, but it’s been successfully implemented in a number of applications across Europe.  And today, it’s ready for the North American marketplace.

Stainless Steel Spiral Cores Issue Homogeneous Conformal Cooling
Hasco’s extended spiral core mold components in stainless steel guarantee efficient heat transfer and homogeneous core cooling for medical and cleanroom technologies.

Low-Leakage Temperature Control System Ensures Maximum Safety
The Hasco system showcases improved and robust quick-release couplings that guarantees safe and independent coupling with a maximum flow rate and a small, low-pressure drop.

How Latch Locks Speed Mold Build Time
Ten key features and functions of internal and side-mounting latch-lock devices that help moldmakers build molds faster and more safely.

Stainless Steel Cooling Range Guarantees Reliable, Leak-Proof Temperature Control
Hasco’s cooling range is a clean and reliable temperature control system for effectively cooling injection molds when using hot or cold water or heat-transfer oil. 

Hot Runner Manifold Offers Increased Flexibility
Hasco’s additively manufactured Steamrunner hot runner manifold allows for increased flexibility with injection molding.

Injection Mold Machined Plates Boost Flexibility
Hasco’s P1 plates, machined on all sides, come in about 2000 additional variants in dimensions, thicknesses and materials.

Single Shot Nozzle Focuses on Efficiency, Low Cost, Functionality
The extended nozzle range for hot runners provides a wide range of nozzle variants to allow a straightforward feed into a sub-runner or direct gating to the molded part.

Positive Locking Cylinder Permits Safe Locking
Hasco’s positive locking cylinder Z2302/... is suitable for use with core pulls and mold slides and enables service temperatures up to 180°C.

Hydraulic Clamping Cylinders Offer More Reliable Mold Connections
Hasco offers a broad range of double-clamping cylinders in different dimensions that are suitable for individual applications. 

Amerimold Connects Product Showcase, Part 2
Plan ahead for Amerimold Connects with a sneak peek of some highlighted products from OSG USA Inc., Hasco America, Inc., Best Tool & Engineering Company Inc., the American Mold Builders Association , Cheto Corporation and Matsuura Machinery USA Inc.

Round Latch Lock Units Enable Optimum Movement
HASCO has developed the round latch lock units Z1780/ and Z1782/ especially for applications when a second parting line or additional ejector plate is necessary.

Component Supplier Ramps Up Support during Crisis
Expediting all work and supplies for Coronavirus projects is key to this mold component supplier They have first priority. “Many of our customers are in the medical field and they need support from us.

HASCO India Receives Best Plastics & Polymers Brand 2020 Award
At the presentation of The Economic Times’ brand awards, Hasco India received the award for “Best Plastics & Polymers Brand 2020”.

Parametric Data Provides Faster Injection Mold Design
To be able to design molds in as effective and time-saving manner as possible, HASCO America Inc. and Radtke design office teamed up for the provision of native, parameterized data.

Linear Needle Guide Unit Ideal for Maximum Precision
The Hasco linear needle guide unit Z073/... is used when maximum precision is required in the flat guiding of plates in injection molding units and die-casting molds.

Cooperation Partners Network at Manufacturing Excursion Event in Lüdenscheid
Several moldmaking company partners were able to network and attend an excursion presenting the mold manufacturing expertise existing in Lüdenscheid.

Product Categories of HASCO America, Inc.

Air and Hydraulic Cylinders
Aluminum Alloys
Blades
Bronze
Bushings
Cleaners
Cooling Systems
Core Pins
Counters
Date Inserts
Ejector Pins, or "Knock-out Pins"
Gate Inserts
Gears
Hot Halves
Hot Runner Manifolds
Hydraulic Valve Gate Nozzles
Injection Molds
Interlocks, or Taperlocks
Internal Mold Cooling Products
Leader Pins
Lifters
Locating Rings
Mold Bases and Frames
Mold Insulation
Mold Quoting Software
Mold Sprays, Grease, Lubricants & Releases
Mold Wiring
O-rings
Pneumatic Valve Gate Nozzles
Power and Thermocouple Cables
Pressure Controls, Sensors, Monitors
Quick Mold Change Systems
Rust Preventatives
Side Actions or Cam Actions
Slides
Socket Head Cap
Sprue Bushings
Stainless Steel
Stop Pins
Straight Locks
Support Pillars
Temperature Controls, Monitors, Sensors
Thermal Edge Gate Nozzles
Thermal Hot Tip Nozzles
Thermal Multi-Gate Nozzles
Thermal Pin/Heat Pipes
Tool Steel/Mold Steel
Valve Gate Controllers
Valve Gate Sequencers
Wear Plates
Workholding Equipment