DME - Milacron

29111 Stephenson Hwy.
Madison Heights, MI 48071 US

Connect

Metric Pins, Sleeves and Blades

DME’s Custom Pins, Sleeves and Blades offer a solution for challenging new applications that require something special. Save time and be more cost effective with high quality pins, sleeves and blades in a variety of sizes including custom pin lengths up to 51”, sleeve lengths up to 43” and blade lengths up to 24”.

A Message from DME - Milacron

Company Profile

DME was founded to help streamline the manufacture of plastic injection molds.

Let DME show you why its worldwide customers consider us to be an essential resource

Stellar Hot Runner SystemThe proven DME Stellar Hot Runner System brings high performance, exacting precision and flexible, cost-effective modular construction to very small part molding.

VectorForm® Lifter System

The VectorForm® Lifter System will accommodate angles of 30° or more.

As Seen In MoldMaking Technology

tool bench

Getting Hot and Heavy during a Little Hot Runner Training
If a mold is the heart of a molding system, then the hot runner system is the heart of a hot runner mold, and I recently learned that there is a lot to know when it comes to designing and maintaining these systems to ensure optimal mold and part quality and performance.

MoldTrax LLC Hot Runner Extravaganza 2019 classroom

MoldTrax Hot Runner Extravaganza Delivers on Expertise and Education
The “Who’s Who” in processing and hot runner technologies turned out to educate attendees with well-honed wisdom and experience.

DME President Peter R. Smith holding new Cooled Gate Bushing

DME Reconnects with North American Moldmaking Industry
MMT sat down with DME Company President Peter R. Smith to learn how the company has refocused its goals and objectives for serving the moldmaking industry.

An X-Cell Tool and Mold team member sets up a Yasda for lights-out machining.

2019 Leadtime Leader Award Winner: X-Cell Tool and Mold Inc.–The Continuous Drive for Perfection
Continued investment in new technologies and automation has enabled this moldmaker to maintain shorter lead times no matter how large or complex the mold build.

Hawk Mold Hosts Two New England Product Showcases
Hawk Mold and Die Supply Inc. will host two 2019 New England Product Showcases.

Conformal Cooling Technology Maximizes Cooling Efficiency
With so much happening in a busy show year between NPE2018, Amerimold 2018 and IMTS 2018, MoldMaking Technology is revisiting some of the technology that was on display. In case you missed it: DME says that its TruCool Conformal Cooling line provides greater overall cooling coverage with even distribution while maintaining a targeted, consistent temperature and reducing cycle times by as much as 60 percent.

2018 Technology Review and Sourcing Guide: Hot Runners
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including hot runners.

Cold Jet Combi 120H

2018 Technology Review and Sourcing Guide: Mold Maintenance, Repair & Surface Treatment
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including mold maintenance, repair & surface treatment.

2018 Technology Review and Sourcing Guide: Mold Components
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including mold components.

Open Mind software screenshot

2018 Technology Review and Sourcing Guide: Software
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including software.

NPE2018 in Orlando, Florida

NPE2018 Video Recap: Exhilaration, Innovation and Inspiration
MoldMaking Technology’s editorial team recaps some highlights from the show floor at NPE2018, including a technology slideshow, seven podcasts recorded live from the event and a video.

Conformal Cooling Products Maximize Efficiency
DME says its TruCool product and services line provides greater overall cooling coverage with even distribution while maintaining a consistent temperature and reducing cycle times by as much as 60 percent.

Hasco stack-mold with standard components.

Standardization Solutions Drive Mold Component Innovations
Mold component suppliers continue to standardize products that speed mold building while also developing technology that addresses design, cooling, release and other challenges.

manifold

Technology Tuesday: Hot-Runner Maintenance
Cruise through this week’s Technology Tuesday slideshow to see articles and products on hot-runner maintenance.

Summary of Mexico plastics industry information

Statistics Uphold Mexico’s Importance in Plastics Industry
Did you know that Mexico is the world’s second largest importer of molds and tools?

A 64-cavity cap mold built by Fairway Injection Molds in Walnut, California.

Mexico: Manufacturing Mecca to the South
A mold-building perspective on Mexico’s manufacturing opportunities, trends and challenges.

Alliance laser machines

Amerimold 2017: Multitudes of Metalworking Materials and Machines
Amerimold proved once again that it is THE event for moldmaking.

PowerMill CAM

SLIDESHOW: The Final Countdown to Amerimold
It’s Amerimold Eve! Our exhibitors are assembling and putting final touches on their booth displays today and there are so many new companies – plus familiar companies who have something new to show attendees. Amerimold 2017 is not to be missed.

injection molding

Technology Tuesday: Hot Runners and Mold Components
This week’s Tech Tuesday blog brings readers a review of several products announced during the last few weeks, namely hot runner and mold componentry.

Milacron's DME Announces Partnership with Linear AMS for Conformal Cooling Solution
Milacron’s DME Product Brand Announces Partnership with 3D Additive Leader Linear AMS to Provide Revolutionary Conformal Cooling Solutions under its New TruCool® Product Line

okuma machine

Technology Showcase: Case Studies, Part 2
For the many differences between moldmaking companies that I’ve observed, there are just as many similarities, and by that I mean challenges shared. You may find some solutions here.

Product Categories of DME - Milacron

Air and Hydraulic Cylinders
Air Grinders
Aluminum Alloys
Blades
Bushings
Calibrators
Chillers
Cleaners
Coolants
Cooling Systems
Core Pins
Counters
Cutting Fluids
Cutting Tools
Date Inserts
Die Cast Dies
Ejector Pins, or "Knock-out Pins"
End Mills
Fixtures
Gages
Gaskets
Grinding Wheels
Guides
Heat Transfer Fluids
Heating Equipment
Hot Halves
Hot Runner Manifolds
Hydraulic Valve Gate Nozzles
Injection Molds
Inserts
Interlocks, or Taperlocks
Internal Mold Cooling Products
Isolation Pads
Leader Pins
Levelers
Lifters
Locating Rings
Machining Services
Manual Cleaning Equipment
Mold Bases and Frames
Mold Cleaning Services
Mold Dehumidification Systems
Mold Finishing Systems
Mold Flow and Simulation Services
Mold Insulation
Mold Maintenance & Repair Services
Mold Sprays, Grease, Lubricants & Releases
Mold Transporters
Mold Wiring
Mounted Points
O-rings
Part & Tooling Production Services—Additive Manufacturing
Pneumatic Valve Gate Nozzles
Polishing Equipment
Power and Thermocouple Cables
Precision Hand Tools
Pressure Controls, Sensors, Monitors
Process Controllers
Profilers
Pry Bars
Quick Mold Change Systems
Reamers
Replacement Parts
Rust Preventatives
Safety Equipment
Scrapers
Setup Cart
Side Actions or Cam Actions
Slides
Socket Head Cap
Sprue Bushings
Stainless Steel
Stop Pins
Storage Equipment/Services
Straight Locks
Support Pillars
Switches or Indicators
Temperature Controls, Monitors, Sensors
Thermal Hot Tip Nozzles
Thermal Pin/Heat Pipes
Tool Steel/Mold Steel
Toolholders
Trimmers
Ultrasonic Cleaning Equipment
Valve Gate Controllers
Valve Gate Sequencers
Wear Plates