CGI 3D Scanning

15161 Technology Dr.
Eden Prairie, MN 55344 US

Connect

As Seen In MoldMaking Technology

Digilog touch probe from Blum-Novotest

2018 Technology Review and Sourcing Guide: Inspection/Measurement
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including inspection/measurement.

Scanning Inspection System
Crump Group Inc.’s (CGI; Eden Prairie, MN) CSS 300 Cross Sectional Scanning Inspection system combines the company’s cross sectional scanning technology with their Spec.Check inspection software into a turnkey solution ideally suited for capturing the most complex internal and external geometry of small injection molded parts—offering an alternative to many technologies for first article inspection, reverse engineering, failure analysis and tooling qualification.

Inspection Software
Crump Group Incorporated (CGI; Eden Prairie, MN) has released version 4.07 of its proprietary Spec.Check inspection software, which uses standard ASCII point cloud data to register a part in 3-D space—enabling rapid measurement and reporting of any external or internal dimension, slope, angle or radius.

Figure 2a and Figure 2b

3-D, Non-Contact Scanning for Inspection: Info for Moldmakers
Understanding the differences and similarities between CMM and 3-D scanning allows moldmakers to adapt to, apply and leverage 3-D scanning technology within their shop environment.

Personal Inspection System
The CSS-300 Personal Inspection System and Spec.Check Inspection Software from CGI – Capture Geometry Internally (Eden Prairie, MN) reduces the time and expense incurred in measuring and qualifying first article parts from single and multi-cavity tools.

Product Categories of CGI 3D Scanning

Inspection/Measurement Services
Laser Digitizing/Scanning Equipment
Optical Measuring Systems
Reverse Engineering Software
Scanners
Testing/Analysis Services