Seco Tools, LLC

2805 Bellingham Dr.
Troy, MI 48083 US

Connect

 

Seco Releases MDT 2MM Small Tools for Grooving, Parting and Profiling

 

 

 

 

Seco has released the MDT 2MM for grooving, parting and profiling of small and micro parts. An extension of the successful MDT family of tools, the MDT 2MM offers a cutting edge width of just 2 mm (0.078”).

The MDT 2MM is available in two sizes of inserts and toolholders. Designed primarily for Swiss machining applications, MDT19 inserts feature a compact size and are shaped to provide insert indexing accessibility even when space is restricted. With a longer reach, larger toolholders and broader product range, the MDT28 size offers solutions for general machining applications. MDT28 allows parting off of bars up to 2” in diameter. Both sizes of inserts feature a much thinner width than the 3 mm and 4 mm tools in the MDT family, resulting in tremendous costs savings on materials when parting.

To maximize stability and accuracy, the MDT 2MM incorporates the unique Secoloc insert clamping system. A combination of V-top clamping and serrated contact surfaces between the insert and toolholder ensures the highest possible process security.

MDT 2MM inserts are available in multiple geometries. The FT- geometry provides strong performance for grooving and parting off. FTR6 and FTL6 geometries were designed to reduce burring and center pip when parting off in more demanding applications. For profiling, the round MP- geometry is optimal.

To maximize applicability of MDT 2MM, inserts are available in CP500 and CP600 grades. CP500 offers high-speed capability and applies to general grades with high wear resistance, while CP600 provides additional toughness for more difficult applications, such as interrupted cuts.

For more information on Seco’s MDT 2MM, please visit http://www.secotools.com/en-US/Global/Products/Turning/MDT/MDT-2-mm/.

 

 

 

 

 

 

 

 

A Message from Seco Tools, LLC

Company Profile

Seco develops, manufactures and globally offers metalcutting solutions with the industry's highest levels of quality, service and cost-efficiency.

As Seen In MoldMaking Technology

Tech Trends: Most Viewed Products of 2019, Part II
As 2019 comes to an end, see the most viewed products from throughout the year that could bring your business success in 2020.

Tech Trends: On the Cutting Edge
This collection of highlighted cutting tools products offer complete solutions for machining processes from companies like Walter, Seco, Big Kaiser and Tungaloy.

Mitsubishi Electric new SV12P Sinker EDM

MC Machinery Introduces New EDM Machines and More at National Open House
Focus on new EDM technologies and milling strategies shows attendees how they can optimize production.

End Mill Product Family Offers Versatility
Seco expands its Niagara Cutter Stabilizer product family with the addition of the ST540 five-flute end mill.

Holders Target Coolant for Chip Control and Process Stability
Additions to Jetstream Integrated tooling from Seco Tools eliminate coolant-through tooling and connector interference that hinders grooving, parting-off and other turning operations.

Tech Trends: A Cut Above the Rest
This collection of highlighted cutting tools products can provide simple solutions for effective chip evacuation, shorter throughput times, improved surface finish quality and greater stability in uneven entrances and exits.

2019 Technology Review: Cutting Tools
MoldMaking Technology’s 2019 Technology Review and Sourcing Guide offers some of the latest highlighted products and services from supplier companies from a variety of categories, including cutting tools.

Seco Tools Welcomes New Director of Customer Experience
To maximize customer engagement and satisfaction, Seco Tools names Bill Barcelona as Director of Customer Experience.

micro mold

Micromilling Demands Optimal Tool Tip Geometry
Advanced tool tip geometries ensure free-cutting properties necessary for chip consistency and long tool life in micromilling applications.

Seco Jabro JS750 Solid End Mills

New End Mills Provide Cost-Effective High Performance on Tough Materials
Seco Tools’ new Jabro-Solid2 JS 750 end mills are designed to provide longer tool life when machining tough materials.

Seco Tools new LP09 inserts for face milling

New LP09 inserts Combine Higher Insert Corner Strength with Dual Cutting Edges
Seco Tools’ new, larger LP09 inserts combine higher insert corner strength with dual cutting edges to speed face milling.

Seco Tool award winners

Seco Wins Supplier Award
Seco Tools has been awarded Supplier of the Year at the 2018 gathering of the Affiliated Distributors (AD).

mold

How to Hard-Mill Effectively
These are five rules for improving cutter performance and cutter life while maintaining tight tolerances during hard milling.

Tyler Martin

Seco Tools Announces New Manager
Seco Tools has named Tyler Martin as its new manager of engineering services.

Seco Tools Joins OMIC as Manufacturing Partner
The Oregon Manufacturing Innovation Center Research and Development (OMIC R&D) continues to grow its company membership with the recent addition of global cutting tools manufacturer Seco Tools LLC.

Makino at IMTS

Collaboration, Flexibility, Speed and More at IMTS 2018
Attendees walked the miles of aisles to find that IMTS 2018 delivered it all and so much more.

colage of molds

IMTS 2018: Process,Technology and Service Advancements
Advancements in automation and digital manufacturing took center stage during IMTS last week, but developments in additive manufacturing, cutter technology, machining solutions, simulation software, EDM, laser technology and customer service were other hot items.

mold

IMTS Ripe with Mold and Die Technology
The complexities and tight tolerances of mold work make it a very demanding trade.

Augmented reality screen shot

AR Immersion to Learn about Cutting Tools and Services
Along with product video, imagery and application information, the Seco Tools booth experience includes expert voiceovers and animations. 

FANUC employee working with FANUC robots on a tablet

Tradeshow Tuesday: On Display at IMTS 2018, Part 2
Check out this week’s slideshow to see some of what will be on display at the show.

Tungaloy TungFeedQuad cutting tool for die and mold machining

Accuracy and Surface-Finish Needs Drive Cutting-Tool Solutions
Cutting-tool suppliers are using advanced coatings, new thread designs, education and collaboration to help moldmakers maximize results.

Product Categories of Seco Tools, LLC

Cutting Tools
End Mills
Hard Milling
High-Feed Milling
Inserts
Lathe Tooling and Accessories
Reamers
Tool Management Systems
Toolholders