Canadian Association of Mold Makers

2000 Talbot Rd. W
PO Box 16
Windsor , ON N9A 6S4 CA

Connect

As Seen In MoldMaking Technology

sinker EDMs

Five-Axis Hard Milling Improves Electrode Accuracy
Fully automated, high-speed hard milling centers saved moldmaker time, money, handwork, allowed wider-range of EDM burns to be achieved.

Canadian Manufacturing Resiliency Helps Overcome COVID-19 Challenges

Canadian Manufacturing Resiliency Helps Overcome COVID-19 Challenges
Three-quarters of companies have recalled employees or hired new staff in what is considered proof of the resiliency of the manufacturing sector, reports a monthly survey of moldmakers and industrial automation companies from the Canadian Association of Mold Makers and Automate Canada.

Canadian Manufacturing Ramp Up Accelerating

Canadian Manufacturing Ramp Up Accelerating
After Canadian manufacturing began setting its return to work guidelines, ramp up is underway in manufacturing and automation, with health and safety and a mostly closed border being some key issues for manufacturers. 

MMT Chats: Remoting, Reaching Out and Ramping Up Recyclable PPE

MMT Chats: Remoting, Reaching Out and Ramping Up Recyclable PPE
Two members of the Axiom, Intex Tooling and Smart Attend team chat about COVID-19's impact on the business, employee morale across the business units, and the switch to producing and selling recyclable face shields.  

Back to Work Planning Underway for Canadian Manufacturing

Back to Work Planning Underway for Canadian Manufacturing
Return to work guidelines are on the radar and underway for Canadian manufacturing, and it’s clear that manufacturing is focused on the next 90 days and that repairing for new health and safety standards in the workplace is important. 

Canadian Manufacturing Turning A Corner Against Coronavirus Crisis

Canadian Manufacturing Turning A Corner Against Coronavirus Crisis
Manufacturing in Canada continues to be hit hard by the COVID-19 crisis; however, stats from Canadian Association of Mold Makers’ and Automate Canada’s weekly survey of the coronavirus impactindicate a corner may have been turned.

Glimmers of Hope in Canadian Manufacturing During Coronavirus Crisis

Glimmers of Hope in Canadian Manufacturing During Coronavirus Crisis
Results from the Canadian Association of Mold Makers’ and Automate Canada’s weekly survey of the coronavirus impact shows that even though the Canadian manufacturing continues to be hit hard by COVID-19, there are glimmers of hope in the expansion of capabilities for medical equipment manufacturing, as well as working together as an industry and as a broader community.

CAMM, Automate Canada Release Coronavirus Impact Survey Results-Week 2

CAMM, Automate Canada Release Coronavirus Impact Survey Results-Week 2
Employee anxiety was listed as the number one problem from Canadian Association of Mold Makers and Automate Canada survey respondents to a question on what is the biggest impact on their Canadian manufacturing business to date.

CAMM, Automate Canada Release Coronavirus Impact Survey Results

CAMM, Automate Canada Release Coronavirus Impact Survey Results
The Canadian Association of Mold Makers (CAMM) and Automate Canada released the results of a recent COVID-19 impact survey.

AMBA Tooling Trailblazer 2019 Award winner

Association Update: News and Reviews from Industry Organizations, December 2019
News and reviews from the American Mold Builders Association (AMBA) and Canadian Association of Mold Makers (CAMM), and The Mold Technologies Division of the Society of Plastics Engineers (SPE).

aluminum mold

Addressing Aluminum Tooling Objections
Mold builder shares the technical and financial advantages it experiences using aluminum tooling.

AMBA Plant Tour at Amerimold 2019 - Craftsman

Association Update, September 2019: News and Reviews from Industry Organizations
News and reviews from the American Mold Builders Association (AMBA) and Canadian Association of Mold Makers (CAMM), and The Mold Technologies Division of the Society of Plastics Engineers (SPE).

AMBA Plant Tour at Amerimold 2018 - Quest Industries Inc.

News and Reviews from Industry Organizations, June 2019
News and reviews from the American Mold Builders Association (AMBA) and Canadian Association of Mold Makers (CAMM), and The Mold Technologies Division of the Society of Plastics Engineers (SPE).

Mold Shops Value Social Media for Branding, Reach and Recruitment
Mold builders share their approaches to social media, what works and why using the medium is so important.

AMBA scholarship check presentation at Romeo Technology and Engineering

News and Reviews from Industry Organizations, March 2019
News and reviews from the American Mold Builders Association (AMBA), the Mold Technologies Division of The Society of Plastics Engineers (SPEMTD) and Canadian Association of Mold Makers (CAMM).

Canadian Association of Mold Makers' Automate Canada logo

Association Update: The Canadian Association of Mold Makers
The Canadian Association of Mold Makers announces strategic partnerships with like organizations in India.

Home page for AMBA

News and Reviews from Industry Organizations, December 2018
News and reviews from the American Mold Builders Association (AMBA), the Mold Technologies Division of The Society of Plastics Engineers (SPEMTD) and Canadian Association of Mold Makers (CAMM).

CAMM members with Windsor Rotary Club

News and Reviews from Industry Organizations, August 2018
News and reviews from the American Mold Builders Association (AMBA), the Mold Technologies Division of The Society of Plastics Engineers (SPEMTD) and Canadian Association of Mold Makers (CAMM).

CAMM and Windsor Rotary at new Centennial Plaza

CAMM Members Contribute Skills for Windsor Rotary Centennial
Members of the Canadian Association of Mold Makers (CAMM) contributed time and skills to create sculptures for the new Rotary Club of Windsor (1918) Centennial Plaza.

AMBA logo

Association Update: News and Reviews from Industry Organizations
News and reviews from American Mold Builders Association (AMBA), The Mold Technologies Division of The Society of Plastics Engineers (SPEMTD) and Canadian Association of Mold Makers (CAMM).

Apprentice learning to polish an injection mold.

2017: Gone but Not Forgotten
I wish to thank everyone I’ve worked with to write features that have appeared each month in MMT. Plus, a look at a series of features about one of my favorite topics: Workforce development.

Product Categories of Canadian Association of Mold Makers

Blow Molds
Compression Molds
Die Cast Dies
Extrusion Blow Molds
Extrusion Molds
Foam Molds
Injection Molds
Liquid Injection Blow Molds
Stretch Blow Molds
Thermoform Molds
Trade Associations, Agencies, Societies