FARO Technologies, Inc.

250 Technology Park
Lake Mary, FL 32746 US

Connect

As Seen In MoldMaking Technology

Inspection of mold component using FaroArm technology at Delta Mold

A 'Quality Without Compromise' Mindset and A Diverse Customer Base Gives Delta Mold More Peaks Than Valleys in Business
Quality-driven processes and focus on diversity in the markets served are key to Delta Mold’s continued success.

die cast dies at Hyatt Die Cast

Inspection/Measurement Software Helps Hyatt Die Cast and Engineering Reduce Costs While Increasing Efficiency and Quality
Hyatt Die Cast and Engineering Reduces Manufacturing Costs While Increasing Efficiency and Quality with Integrated Inspection/Measurement Software.

Digilog touch probe from Blum-Novotest

2018 Technology Review and Sourcing Guide: Inspection/Measurement
MoldMaking Technology’s annual Technology Review and Sourcing Guide is an accurate, comprehensive, easy-to-read and easy-to-use use guide for researching today’s technology, equipment, products and services. The year’s latest moldmaking product developments within mold engineering/design, build and maintenance/repair are broken down into 10 sections, including inspection/measurement.

Technology Showcase: Heading to Westec?
If you’re planning to head west to attend Westec, billed as “the West Coast’s Leading Manufacturing Event,” today’s blog is a slideshow preview of products you can expect to see there.

Faro Vantage

Laser Trackers with Mobile Device Control Enable Portablity
Westec 2017: Faro will exhibit its Vantage S and Vantage E laser trackers, which offer mobile device control and portability for efficiency and ease of use.

3D Scanning Services Highlighted
The QC Group will highlight its 3D scanning services, demonstrating a 9-ft. arm FaroArm CMM from Faro Technologies.

portable measurement arm

Will This Part Clean Up?
To improve your manufacturing processes upstream and downstream, consider CAD data and 3D digitizing for lean layout and scrap reduction.

laser scanning

Inspection/Measurement Advances Yield Better Molds Faster
A roundtable discussion of the latest trends and developments in mold inspection and measurement technology highlights the cycle time reduction, accuracy improvement and cost decrease benefits.

Case Study / Inspection & Measurement
Using Portable CMM Technology to Improve Moldmaking Processes

FARO Celebrates 30 Years with a Custom Chopper from Paul Jr. Designs
Watch the fabrication and unveiling of the new FARO custom chopper.

Figure 2

Arm-Wrestling Unique Measurement Problems
A look at the advantages of a portable coordinate measuring machine in mold design and manufacture.

Thermoform Plastics' quality assurance team

Take Measurement to the Tool
A portable CAM measurement system cuts inspection times by 84 percent, improves accuracy and conducts tooling capability studies.

Product Categories of FARO Technologies, Inc.

Coordinate Measuring Machine (CMM) Software
Coordinate Measuring Machines (CMMs)
Laser Digitizing/Scanning Equipment
Noncontact Measurement Systems
Optical Measuring Systems
Probes
Reverse Engineering Software
Scanners
Vision Systems