Share
Related Suppliers
Dapra Corporation’s Mid-Feed cutters and inserts–part of its high-feed RHINO-FEED™ line–provide an excellent high-feed milling solution, allowing for extreme feed rates in light- to moderate-DOC applications, the company reports.
Dapra’s Mid-Feed line is optimized for cuts of 1.000” to 3.000” diameter and a maximum depth of .045”, with 10mm IC (inscribed circle) inserts featuring four usable edges. End mills, shell mills and modular heads are available with two, three, five or six flutes. Mid-Feed is well suited for lighter-duty machines (40-taper, linear ways, etc.) running at moderate FPT.
Dapra’s RHINO-FEED line adjusts feed rates to compensate for the significant chip thinning that occurs during high-feed milling when an extreme lead angle is utilized. Mini-Feed and Heavy-Feed cutters and inserts are also available for diameters from .500” to 4” and depths of cut from .015” to .060”.
dapra.com
RELATED CONTENT
-
Shrink Fit: The High Accuracy Toolholder of Choice
Requirements in the mold industry are much more precise than general machining, so more attention must be paid toward the selection of the appropriate toolholder in regards to its features and benefits.
-
What To Consider When Thinking About Solid Carbide End Mill Machining
The selection of geometries and coating for solid carbide end mills can be a confusing, but evaluating the operation will determine which end mills are best for the job.
-
Key Factors in Successful Hard Milling
Careful consideration of the entire machining system will improve milling of hardened steels.
