10/30/2017

Machine Center Has Two Spindles and ATCs for Increased Productivity

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Doosan says that its DMP 500/2SP effectively doubles productivity by machining two parts simultaneously and by reducing work loading, unloading and idle times.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Doosan Machine Tools announces the addition of the DMP 500/2SP to its line of vertical machining centers. Equipped with two spindles and two automatic-tool-change (ATC) systems, this new model was designed for production job shops and high-volume parts manufacturers. Doosan says that the DMP 500/2SP effectively doubles productivity by machining two parts simultaneously and by reducing work loading, unloading and idle times in comparison to single-spindle machining centers. For reduced setup times, the right spindle features a W-axis adjustment of 20 mm (0.8"), which enables quick compensation for any variability in fixture heights between spindles.

The DMP 500/2SP has direct drive spindles of 12,000 rpm with 87 lb-ft of torque that are standard. Spindles of 8,000 rpm with 211 lb-ft of torque are optional. Doosan says that the load capacity (1,763 lbs.) and table size (47 x 20.5") easily accommodate a variety of workpieces and fixtures, and together with the 20.5"-Y-axis stroke, offer a machining space well suited for a range of parts. Dual 24-tool capacity magazines are standard, and 30-tool and 40-tool magazines are optional. The dual ATCs have tool-to-tool times of 1.7 seconds, which keep the tools in the cut longer.

RELATED CONTENT

Related Topics

Resources