1/31/2013 | 1 MINUTE READ

Insert Geometries/Customized Toolholders

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

insert geometries/customized tool holders


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Sandvik Coromant has introduced a range of new insert geometries and customized toolholders, featuring fixed nozzles that guarantee a precise coolant jet flow to get right to the center of the cutting zone.


The coolant flows from the pump to the tool through nozzles directed exactly at the cutting zone. This produces a wedge of coolant that efficiently removes the heat from the cutting zone and forms the chip. Improved chip control and longer tool life are just two of the benefits which contribute to secure, predictable machining and preventing unplanned machine stoppages, according to the company.


Increased productivity can even be achieved in tricky applications and in materials which are difficult to machine, regardless of the pressure used. When using low pressure of 5–30 bars (72–435 psi), the Sandvik Coromant HP holders outperform regular tool holders which can have a tendency to flood coolant, the company states. At higher coolant pressures, above ~30 bars (435 psi), the new insert geometry collects the coolant jets to form an even, powerful wedge that breaks the chips, cools the insert and improves the insert tool life. The higher the pressure, the more difficult materials and applications can be machined with excellent results, the company adds.


The company’s advanced cooling technology has until now been a solution primarily for customers using quick change with Coromant Capto®, SL- and QS holding system. Now, the same premium technology can be applied with general shank tools, making it possible for everyone working with wet machining to utilize this highly productive coolant solution, even in small lathes, the company reports.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.


Related Topics