Guide Makes Optimal Surface Contact with Pin to Absorb Force

Originally titled 'Guide Makes Optimal Surface Contact with Pin to Absorb Force'

Meusburger developed the E 3064 guide for inclined pin to address the challenge of the inclined surface machining of the guiding hole in the slide.

Related Topics:

The E 3064 guide for inclined pin from Meusburger achieves optimal surface contact with the inclined pin and best material pairings, which results in a high-force absorption. The machining of the pocket in the slide is possible without inclining. Additionally, the slide stroke can be adjusted subsequently by customizing or adjusting the position of the guide for an inclined pin.

Meusburger developed the E 3064 guide for inclined pin to address the challenge of the inclined surface machining of the guiding hole in the slide. The product is inserted in the slide and forms the contact surface for the inclined pin. The special geometry in the hole creates full-surface contact between the inclined pin and the guiding. Meusburger says that to introduce the guide to the inclined pin, the machinist cuts a rectangular pocket with a threaded hole in the slide and then provides the required clearance for the inclined pin. The machining therefore can be carried out on a conventional three-axle machine and before the hardening. It is possible to execute the installation conveniently from the split line face. The E 3064 guide for inclined pin is available from stock for inclined pins with diameters of 12–30 mm.

Exhibitor

Meusburger US, Inc.

Booth: 614

View Showroom

Editor's Pick

Pre-Hardened Steel Designed for Machinability

With so much happening in a busy show year between NPE2018, Amerimold 2018 and IMTS 2018, MoldMaking Technology is revisiting some of the technology that was on display. In case you missed it: Hasco’s 1.2714HH pre-hardened steel supplements its plate lineup and offers optimum wear resistance, stability and other properties for machining.