1/3/2011 | 1 MINUTE READ

Dual-Spindle Turning Centers

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

DS-30 Series

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

The new Haas (Oxnard, CA) DS-30 Series dual-spindle turning centers provide the ability to turn both ends of a part in a single setup to minimize part handling, increase throughput, and reduce work-in-process. The opposed spindles offer fully synchronized turning for clean part-off, and allow on-the-fly part pass-off to reduce cycle times. The DS machines are available in standard and Super Speed configurations.

 

The standard DS-30 has a maximum cutting capacity of 21" x 26", and is equipped with a 12-station BOT turret. The A2-6 main spindle features an 8.3" hydraulic chuck, and is powered by a 30-hp vector drive system that provides 275 ft-lb of torque. The A2-5 secondary spindle also has an 8.3" hydraulic chuck, and is powered by a 20 hp vector drive system that provides 150 ft-lb of cutting torque. Both spindles turn to 4000 rpm, and have a 2.0" bar capacity. Rapids are 945 ipm on all axes.

 

The Super Speed DS-30SS has a maximum cutting capacity of 16" x 26", and is equipped with a 24-station hybrid BOT/VDI turret. The A2-6 main spindle features an 8.3" hydraulic chuck, and is powered by a 30 hp vector drive system that provides 250 ft-lb of torque. The A2-5 secondary spindle also has an 8.3" hydraulic chuck, and is powered by a 20 hp vector drive system that provides 150 ft-lb of cutting torque. Both spindles turn to 4800 rpm, and have a 2.0" bar capacity. Rapids are 945 ipm on the X axis and 1200 ipm on the Z axis.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

Resources