Cylinder Offers Control of Mold Plate

control cylinders

Related Topics:

Related Suppliers

New cylinders from HASCO offer optimum control of mold plate assemblies Z2371/... and Z2380/... from the company. Multi-cavity hot runner systems are being built into smaller spaces, with tighter cavity to cavity distances, the company explains. With needle valve gated systems, the plunger surface area is frequently not large enough for the necessary forces to close the needles. For this reason, new service-friendly cylinders for operating larger mold plate assemblies have now been developed. They are operated either pneumatically or hydraulically.
With the pneumatic drive Z2371/… only a plunger provided with Viton sealing rings is inserted into the appropriate hole of the platen. The screw connection with the mold plate assembly is then carried out centrally via the plunger. This means that, for servicing, the plunger can remain in the platen if the mold plate assembly has to be loosened. A cover provided with a locking ring seals off the system on the machine side. The simple pocket machining geometry can also be carried out economically, the company notes.
With the hydraulic variant Z2380/… the plunger has been additionally provided with a specially manufactured housing. The inner surface is designed specifically to meet the demands of a hydraulic seal. According to the company, this ensures a high level of impermeability.
As with the pneumatic version, the mold plate assembly is screwed through the plunger, which means that the hydraulic system remains closed and the user's environment is not contaminated with hydraulic oil.
The cutting geometry required for the platen has also been kept very simple to avoid unnecessary costs. The positioning of the feed holes has been designed so as to avoid any damage to the sealing rings during assembly.