5/11/2010 | 1 MINUTE READ

Cyclone - 52TTMY

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Dual 16 Station High Speed Tool Turrets Dual 16-station driven tool turrets (32 Tools Total) features high-speed 0.15-second bi-directional indexing and shortest path indexing logic for fast tool changes.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Dual 16 Station High Speed Tool Turrets Dual 16-station driven tool turrets (32 Tools Total) features high-speed 0.15-second bi-directional indexing and shortest path indexing logic for fast tool changes. The 16-station tool turret features 7-HP driven tool capability on every tool station, providing the muscle needed to handle cross and end-working milling. The 4,000-RPM driven tool system provides a constant torque of 14.75 ft lbs (20 nm) Pre-Tensioned Double Anchored Balls Screws - Premium quality ball screws are pre-tensioned and anchored at both ends, and then 100% inspected for parallelism to the axis guideways. The rotational torque of each ballscrew is inspected over the entire length of travel to guarantee a true smooth non-binding alignment to ensure maximum service life and the highest possible machining accuracy. The geometric ball bar test conducted on each machine checks for servo gain synchronization, backlash, lateral play, squareness, and straightness to ensure your machine will perform to our rigid accuracy and performance standards. Laser technology is employed to measure linear and pitch error accuracy and repeatability to ensure high quality standards for machine performance. Integral (Built-in) Spindle 6,000 RPM Motors Motors with built-in spindles provide the maximum cutting torque (There are no belts to reduce the torque and HP) and provide the highest rate of spindle acceleration and deceleration.
Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

Resources