Digital Manufacturing Insights
When it comes to digital manufacturing, International Mold Corp. uses scanning, reverse engineering, and inspection, but has not ventured into 3D printing. A team attended an integrated digital manufacturing conference to learn more. Here is what they discovered.
This brake light lens cover complete with red/yellow/clear optics and a rubber-like water-proof seal completed in a single print in fewer than three hours on a Stratasys J750 printer. Images courtesy of Gabe Meldrum.
This gear shifter was also printed on the J750 and incorporates leather stitching, texture, woodgrain and a range of hard and soft elements in a single print. In a high-quality print mode, this takes over eight hours to complete, but in a high-mix mode, it finishes in about five hours.
Stratasys also offers a line of PolyJet printers capable of printing actual molds in a digital ABS, which is strong enough to mold a minimal amount (25-50) of parts that match certain criteria, such as, no glass-filled materials and no thin walls, for example. The machine excels with silicone molded parts.
When it comes to digital manufacturing, International Mold Corp. (IMC) (Clinton Township, Michigan) uses scanning, reverse engineering, and inspection (a Faro Edge Scan Arm with Polyworks software and Polyworks Inspection), but has not ventured into 3D printing. So, a team from IMC attended an integrated digital manufacturing conference presented by CATI (Computer Aided Technology) that covered scanning, reverse engineering, inspection, and 3D printing technologies.
Engineers demonstrated scanning and reverse engineering using Creaform Handyscan and Creaform software. Although the technology is different from that of IMC, the principles are the same: scan to a point cloud, convert points to a .stl file and then reverse engineer the object.
For inspection, the CATI team used scans and probes and then compared results to the master data applying standard GD&T principles. This technology is impressive, as it seems almost to replace traditional CMM. Although CMM seems is automated, the scanning technology is portable.
Now by using laser scanning and reverse engineering shops can recreate anything into a digital world, for example, nonexistent or lost mold and tool designs, one-of-a-kind art projects or obsolete car parts. The possibilities are endless.
I want to tell you that this was the most impressive technology I saw that day, but it wasn’t. The 3D printing potential I witnessed blew my mind. I am familiar with 3D printing, but I was not prepared for the art of photorealism 3D printers are applying to 3D-printed prototype parts today (see photos).
I hope this enlightened fellow mold and toolmakers as to some of the current digital manufacturing technologies on the market today. Good luck out there, it is truly a digital world!
Related Content
-
Mold Design Review: The Complete Checklist
Gerardo (Jerry) Miranda III, former global tooling manager for Oakley sunglasses, reshares his complete mold design checklist, an essential part of the product time and cost-to-market process.
-
Take Time to Save Time: 6 Steps in Mold Design to Reduce Back-End Troubleshooting
Westminster Tool shares how the one week it typically takes to perform these six steps in the design phase can save three weeks or more in an overall tool build.
-
New Innovations in Mold Design, Milling Cutters, 3D Scanning
MoldMaking Technology compiles a number of digital-only products from the past month, including mold design software, laser metrology 3D scanners, milling cutters and more.
