1/29/2015 | 1 MINUTE READ

Upping Your Game with Sampling

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Over the years there has been a definite trend in mold manufacturers upping their "molding" game with either sampling services or full production molding capabilities. Here is one such company making the investment.


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon


We have seen a definite trend in mold manufacturers adding or increasing their sampling or full production molding capabilities, and packaging, personal care and medical moldmaker Dynamic Tool & Design is one such company making the investment. 

Dynamic completed a new technology center at its Menomonee Falls, Wisconsin facility last fall. The 17,000-square foot addition increased total square footage to 51,000 square feet and provides space for in-house sampling and training.

The Technology Center houses five molding machines ranging from 80 tons to 650 tons (two are multi-shot capable), which allow for in-house sampling and mold qualification. The Technology Center also enhances in-house training for mold operation and mold maintenance.

Floor space and other resources have been set aside to provide for turnkey projects.

"A customer can have a press shipped to Dynamic and we will build and install a mold in that press, sample, debug and qualify the entire project. We then ship it to the customer ready for production," notes Tom Andrews, Dynamic's Operations Manager.

"Customers rely on Dynamic to help them develop new and improved products, and the technology center has expanded that capability. High quality prototyping is our forte, so with moldmaking and molding facilities under one roof, part changes happen quickly and efficiently," says Dave Miller, Dynamic President.


Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.