9/9/2019

PODCAST: A Campus and Culture of Capabilities and Solutions

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

MGS Mfg Group Business Development Managers Mark Ypsilantis and Brad Bollech did not hide their passion for mold manufacturing, their commitment to the next generation workforce and their experience with the campus of capabilities that is MGS Mfg Group during our Manufacturing Alliance Podcast.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

“You are never too old to learn.” “Don’t pretend to know more than you do because you are dealing with a lot of smart people in this industry and they will pick that up very easily.” “Every mold shop should have good sales people, a can-do attitude, an ‘always a solution’ culture and curiosity.”

These are just a few words of wisdom shared by MGS Mfg Group Business Development Managers Mark Ypsilantis and Brad Bollech during my conversation with them for another episode of The Manufacturing Alliance Podcast with Tony Demakis.

This dynamic duo did not hide their passion for mold manufacturing, their commitment to the next generation workforce (which requires a passion and patience), and their experience with the campus of capabilities that is MGS Mfg Group of Germantown, Wisconsin. 

 

 

Known for technically-challenging work, such as multi-shot technology, consolidation of operations,the Cadillac of custom automation cells and taking a production solution and dialing it in, the energic team at MGS likes the simple stuff too.

MGS is a three-in-one solution: moldmaking, automation equipment and molding. On top of that it has a technology center for mold validation. 

Listen in to our entire conversation (it’s only 20 minutes this time) here:

For more podcasts click here.


RELATED CONTENT

  • Mold Design Tips for Automation

    Automation suppliers can assist mold manufacturers with proper mold design and engineering before cutting steel for new molds. Hot runner molds, cold runner molds, box filling, insert molding, stack molds and multi-component molding are areas that can be built and managed more inexpensively, reliably and simpler.

  • Wentworth Mold: Blowing Away the Competition

    Niche marketing, a commitment to technology and short leadtimes equal success for this producer of blow molds-and earns them MoldMaking Technology magazine's 2004 Leadtime Leader award.

  • Transform Grinding into a CNC-Based Technology

    Why is it so difficult to automate the grinding department? A common concern in mold shops is how to make the grinding department resemble the rest of the shop.

Resources