11/18/2019 | 2 MINUTE READ

Mold Cleaning Case in Point

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The cold hard facts about dry ice cleaning and a system that helps reduce cleaning time and machine downtime by 95 percent while improving process security.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Connect at

Cold Jet Dry Ice Cleaning will be exhibiting new technology at IMTS 2020 in Chicago this September.

Plan to meet up with their team or get registered here!

Marquardt GmbH is a German family-owned company with 6,000 employees in 12 locations and nine countries that supplies mechatronic or electromechanical parts for the automotive and household equipment industries.  With 100 machines, the company produces around 3,000 different products and one step in the work process was performed manually: the cleaning of the injection molds.

Technicians would remove the mold, clean it and then install and align it again, yielding four-hours of production downtime. In addition, the cleaning was not guaranteed or reliable. The process needed to be optimized.

Marquardt solved this issue with Cold Jet’s i3 MicroClean®-S4 dry ice cleaning system and reduced cleaning time and machine downtime by 95 percent while improving process security.

“The machine gets adjusted and the cleaning work gets done within five to ten minutes, compared with four hours previously. Productivity increased significantly,” Marquardt Product Manager Dieter Stais says.

However, to ensure the system was the best solution, Marquardt tested the equipment for four weeks. With the MicroClean system, the carbon dioxide comes in the form of ice blocks. The blocks are made of carbon dioxide, which is captured as a by-product in chemical or industrial processes. It is reclaimed CO2.

The microparticles are scraped off the dry ice block with a patented shaved ice technology. These particles, in comparison to pellets, have a more refined blasting swath, allowing a more smooth and effective treatment. At the same time, the i3 MicroClean-S4 operates much quieter.

The blast pressure and ice volume are adjustable, and there are different high-performance nozzles. For cleaning wide areas, a nozzle with a blast swath of 2.2 cm is appropriate. The low-flow round nozzle guarantees reliable removal of persistent dirt.

Technicians can also use a 90-degree-angled nozzle for cleaning difficult-to-reach areas and undercuts; and, a rotary union allows the nozzle to turn 360 degree to reach all areas. An ergonomically-designed applicator with integrated LED-light illuminates the areas to be cleaned.

To clean, the mobile and compact device can be easily moved to the injection molds and then connected to the compressed air supply and the static cable. This system permits technicians to clean injection molds hot in the press and without disassembly.

The i3 MicroClean reduced Marquardt’s mold cleaning time by up to 95 percent, according to the company.  

 

 

About the Author

Steve Wilson is the Global Business Unit Manager – Plastics, Rubber & Composites for Cold Jet. As a former plastics business owner he has over 30 years of experience in injection & compression molding, extrusion, blow molding, thermoforming and rotational molding. He began his career at Milacron’s plastics machinery division, serving in manufacturing, product line management and a variety of sales/marketing roles. Steve is a published author and a frequent speaker at plastics industry events. He holds a Bachelor’s degree in Business Administration from Cedarville University and an MBA from Xavier University. 

swilson@coldjet.com

 


RELATED CONTENT

  • Detecting Water Flow Restrictions

    A look at how taking the time and data to analyze a mold problem will help you repair it right—and permanently—the first time.

  • Cleaning Intricate Molds

    A look at non-destructive cleaning processes for complex molds that require the removal of tenacious surface contamination to ensure surface quality and longevity of precision mold and molded part surfaces.

  • Mold Cleaning Done Right Takes a Systematic Approach

    Mold cleaning is just one part of a systematic and comprehensive approach to mold maintenance. Here’s one moldmaker’s strategy for injection mold cleaning and an explanation of where and why different techniques are employed.

Resources