7/18/2019 | 1 MINUTE READ

Live Show Floor Recap from Amerimold 2019

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

In the midst of exhibitors breaking down at the close of Amerimold 2019, the MoldMaking Technology editorial team set up shop at the MMT booth to do a live Manufacturing Alliance Podcast, sharing some immediate insight and feedback on this annual event.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

 

MMT Editorial Team and The Manufacturing Alliance Podcast

MMT Editorial Team and The Manufacturing Alliance Podcast talk everything Amerimold 2019 during a live conversation on the show floor.

 

Since show week last month, MoldMaking Technology has provided a lot of post coverage online in our blog and digital newsletters. On top of that, we have some nice highlights coming out in our August print issue (sneak peek).

However, if you don’t feel like “reading” about the event’s highlights, our special live, from-the-show floor Amerimold 2019 Recap Manufacturing Alliance Podcast might be right for you! 

This way, you can do what you do and “listen” to some fresh-off-the-event insights from me, podcast host Tony Demakis, Senior Editor Cyndi Kustush and Assistant Editor Heather Wintle (with MMT’s European Correspondent Barbara Schulz sitting on the sidelines). 

During this quick recap (about 20 minutes) we talk about everything from trends, technology, new features (sourcing fair) and new demos (Tool Shop Live!) to new technical programming, initial feedback from exhibitors and attendees, as well as a little bit of the fun and comradery Amerimold has become known for over the past 20 years.

Listen in to our conversation here and enjoy … then mark your calendars to join us for Amerimold 2020 in Novi, Michigan June 10th & 11th:

 

Check out more MMT/Manufacturing Alliance Podcasts here.


Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

Resources