8/14/2019 | 2 MINUTE READ

How to Design and Analyze the Right Clamping System

Originally titled 'How to Design and Analyze the Right Clamping System'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The use of innovative clamping systems to optimize the moldmaking production process requires consideration of five factors based on Industry 4.0 principles.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The use of innovative clamping systems to optimize the moldmaking production process requires consideration of five factors based on Industry 4.0 principles.

1. Engineering: Engineers should be fully involved and invested in the process of workholding. The clamping setups should be established before the workpiece is clamped and secured to save time and confusion at the CNC machine table. 

2. Clamping: Modular and standardized clamping systems should be available in both manual and automatic versions for all clamping needs and production equipment. A clamping system should establish the exact location of a work part, whether in manual or automation setups. There are many zero-point systems available, but a shop must consider the adaptability of the system for a full range of workpiece sizes.

3. Motion: Automatic handling and storage systems for workpiece products and production equipment, and toolchanger and pallet changer technologies will eventually be used in a shop’s production process, so it is vital to ensure a smooth transition when integrating a workholding system into these automation systems. Implementing a smart workholding system changes the moldmaking workflow into a standardized production process. Standardizing the process eases the integration of automation.

With the influx of five-axis CNC machines continuing in mold manufacturing, the ability to machine all five sides of a workpiece should also be considered before investing in a workholding system solution. For example, the workholding system should be modular to allow multiple configurations for all necessary machining processes, such as vertical milling, horizontal milling, EDM and wire cutting operations.

4. Control: Without a flexible control software system for managing the production process, the achieved gains from the clamping solution will be nullified. The goal is to run lights-out during unattended shifts at night and on weekends.

5. Online Support: The ability to find and obtain instant access to product information is critical, so a connection to a customer support area from their website is vital.

These five considerations establish an argument for investing in “smart” or Industry 4.0-enabled technology that offers quick clamping, thereby reducing setup times. A smart system knows locations, eliminating the time needed for probing the workpiece location. It also offers permanent references for rework, design changes and changeovers due to small errors.

 

 

 

For More Information

 

FCS North America

peter.hoenig@fcsnorthamerica.com

519-737-0372

www.fcssystem.com

 

About The Contributor

Peter Hoenig is FCS North America product and application manager.

 


Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

Resources