6/6/2019 | 1 MINUTE READ

FREE WEBINAR: 5 Things to Consider When Evaluating Additive Manufacturing

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

This webinar will look at five keys areas that are vital to placing additive on the manufacturing floor right next to your injection molding production lines.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

“Additive is such a great technology, but when you start to talk about manufacturing, there are many challenges to consider before a company makes the switch to a new process like additive manufacturing,” Bruce Bradshaw of Evolve Additive Solutions says.

So, to follow up my June issue feature with Evolve on how to calculate the full cost of additive manufacturing and to tease our upcoming AM in Plastics Workshop at Amerimold, Bradshaw is going to present a free webinar that digs a little deeper into the five keys areas that a company should look into if it wants to place additive on the manufacturing floor right next to its injection molding production lines.

Those five areas are materials, speed, quality, scalability and cost.

 

Often companies limit their additive technology options for manufacturing because they are unable to address these five crucial factors when calculating the full cost (and benefit) of additive manufacturing for each process considered. Tune in to this webinar to learn more about these critical criteria.

Bradshaw will also provide a peek under the hood of Evolve Additive’s new STEP technology and how it can produce injection molding quality parts for quantities of up to 1M parts annually.

 

 

This FREE webinar will take place June 19 at 2PM EST.  Register Today!

 

 


Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from MoldMaking Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Laser Sintering And Conformal Cooling Channels

    Moldmakers who are interested in exploring conformal cooling, but are concerned about its complexity and expense need to understand two things: it is neither complex nor expensive.

  • Reduce the Time and Costs of Jig and Fixture Manufacture

    When it comes to the manufacture of jigs, fixtures and assembly tools, time-to-market for new products can be reduced, overall costs can be saved and the quality of the resulting components/production can increase with the use of additive fabrication—laser sintering and fused deposition modeling.

  • Mold Cooling Options

    A look at three options for integrating conformal cooling into a core or cavity with an emphasis on vacuum brazing.

Resources