4/22/2020 | 3 MINUTE READ

COVID-19 Is a Rallying Call to the Plastics Industry to Redesign, Refocus and Reshore

Originally titled ' COVID-19 Is a Rallying Call to the Plastics Industry to Redesign, Refocus and Reshore '
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Mold manufacturers who have been critiqued for slow lead times, as compared to the overseas competition, are proving to themselves and customers during COVID-19 that North American mold manufacturers and suppliers can unite and do things at an extraordinary speed.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

 

The North American mold manufacturing industry should be very proud of the speed at which it is operating during this crisis. Mold component and hot runner suppliers are delivering products to mold builders next day, and mold builders are completing five-, six-, eight-, 10-week jobs in 10 days from quote to mold to press.

Let me back up. This crisis revealed that there was a pent-up demand for some of the much-needed medical products, such as ventilators, but instead of being ahead of the curve as a nation, we had to react. The lesson here is that industry needs to better understand the supply chain and the needs of customers.  Mold builders must start to explain to their OEM and molder customers that they are capable of doing the work, and then must direct resources to improve internal processes and efficiency.  

DME President Peter Smith explained that there are 12 manufacturers of ventilators in North America, so when the virus hit DME began reaching out through the supply chain to understand who was supplying those 12 and what they could do to help. They went direct to the OEM, but most often spoke with customers. Through these conversations, Smith discovered a solution that would help build these urgently-needed molds and provide a strategy for North American mold builders to be cost-competitive with overseas tooling.

“North American mold manufacturing has the engineering prowess to deliver a mold at a lower cost than an overseas mold simply because extra freight will always be a factor. We are close to the customer.”

This brings up the importance of reshoring. The supply chain gets caught up with tooling costs instead of focusing on the final part cost, which would prove that North America is a more viable source.  “A mold that performs better during process will always beat the initial price of the tool. The economics of the tool are relatively minor to the ultimate value through the lifecycle of the production,” DME President Peter Smith says.

Moldmakers need to put more pressure on their suppliers to give them the tools so they can compete and do what they can do. For example, quick mold change. “Although this is a 25- to 30-year-old concept, it still speaks to economics today. It is an inexpensive option because you basically drop in an insert, which means every time a change is necessary, a molder only needs to work on the insert side of things, which is exactly what the molder wants to do,” Smith says.

In comes, the newly expanded, simplified, standard MUD® Quick-Change mold base system. “Our part in all of this is guiding customers to standard sizes. Teaching designers that if they can operate within a certain footprint and do a slight mold design change, we can deliver next day. Many companies responded. Mold designers began to understand the flexibility they had in the supply chain,’ Smith says.

The revamped MUD line is an integrated supply chain solution that allows OEMs to work on faster delivery times, reduced supply chain economics, and lower upfront tooling investment. This is a way of bringing North American production into play.

Smith calls this modular standardization, which allows DME to be efficient in its operations and manufacturing, which they can then pass that same value through the supply chain. They help customers build around modular systems that are easy to maintain and offer high-productivity output. Basically, DME is delivering from a speed and cost perspective because they didn't make the solution sophisticated; they kept it simple and modular.

This is DME’s tool to help build North American mold manufacturing.  “Our three deliverables to compete with overseas tooling are (1) redesign, so tooling costs are lower than China, (2) deliver faster, and (3) provide more productivity through the processing phase. This works for the majority of mold sizes used in North America.

This expanded, simplified, standardized MUD line for moldmakers will ultimately allow them to push the benefits to the molder, and then ultimately to the OEM where they can benefit from shorter run sizes and more customization.

DME saw a 400-percent boost in demand for its next-day delivery mold base and MUD Quick Change Systems that went out in two weeks.

 

RELATED CONTENT

  • Being Connected to Community and Customers during COVID-19

    Mold manufacturers and technology suppliers across North America have day jobs and night jobs when it comes to doing more to help both their customers and local communities during the coronavirus pandemic. Here is one mold component supplier’s story.

  • VIDEO: Use Data to Be Proactive Instead of Reactive

    The current supply chain disruption—as a result of the Coronavirus and any other unexpected event—serves as a reminder that it may be time to rethink the manufacturing supply chain. Data can help make that case and give you some control of the future of your business. Watch this video to learn more from Gardner Intelligence.

  • MMT Chats: A Truly "Coronavirus" Collaborative Effort Puts Moldmaking, Manufacturing in the Spotlight

    Die-Tech and Engineering and Bico Steel worked together through the night to build and deliver a complex tool needed to help increase ventilator production. Listen to my casual conversation with Die-Tech Owner Bill Berry as he breaks down the timeline, project, the players involved and how amazing American manufacturers are.