| 1 MINUTE READ

Have Designs on Conformal Cooling?

This Wednesday, April 27, MMT will host a webinar titled Practical Considerations for Conformal Cooling Designs.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
�

 

 

This Wednesday, April 27, MMT will host a webinar titled Practical Considerations for Conformal Cooling Designs. Please join us at 10 a.m. EST because it’s not only free, but it’s packed with a lot of great tips and information about cooling optimization based on conformal cooling and additive manufacturing.

Here’s what this webinar, presented by Autodesk, will discuss:

  • Part quality and warpage optimization
  • Thermal behavior of inserts (simulation and thermovision analysis)
  • Conformal cooling design optimization with regard to flow rates and pressure losses
  • Maintenance of inserts with conformal cooling.

Case studies will illustrate real-world usage of these approaches to conformal cooling design. Bring your questions, as there will be time at the end of the presentation to ask. But first, you must register, so please click here, now. I’ll be moderating, so see you tomorrow!

RELATED CONTENT

  • Mold Cooling Options

    A look at three options for integrating conformal cooling into a core or cavity with an emphasis on vacuum brazing.

  • Dispelling Aluminum Tooling Myths

    Myths have always been around: the world is flat and the sun revolves around the earth— to name a few.

  • Reduce the Time and Costs of Jig and Fixture Manufacture

    When it comes to the manufacture of jigs, fixtures and assembly tools, time-to-market for new products can be reduced, overall costs can be saved and the quality of the resulting components/production can increase with the use of additive fabrication—laser sintering and fused deposition modeling.