This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Mold Maintenance and Repair

PUBLISHED: 2/25/2015

Mold Cleaners Approved for Food-Related Applications

Slide Products will showcase four mold cleaners that are newly registered NSF, a continuation of the USDA approval program for products used in plastics processing for food applications.

PUBLISHED: 2/24/2015

Tilting Table Enables Mold Repositioning on Spotting Press

Millutensil spotting presses feature a specially designed tilting table that allows a mold to be repositioned from 0 to 180 degrees without it having to be removed from the press, as it would on a traditional spotting press.

PUBLISHED: 10/28/2014

Laser System Cuts Range of Materials

LaserStar Technologies’ 3900 Series FiberStar laser cutting system is designed to create dimensionally accurate laser cuts in a range of materials and applications.

PUBLISHED: 10/1/2014

Mold Cleaner Contains No Chlorinated Solvents

The newest formulation of Slide Products’ Mold Cleaner Plus Degreaser 4 contains no chlorinated solvents and is less expensive, helping reduce the cost of mold maintenance and increasing worker and workplace safety.

PUBLISHED: 9/30/2014

DLC Coating Reduces Wear on Latch Locking Units

The functional surfaces of Hasco’s Z170, Z171 and Z174 latch locking units feature a diamond-like carbon (DLC) coating designed to minimize friction and wear.

PUBLISHED: 9/29/2014

Maintenance Tracking Software Updated for Speed

The newest release of ToolingDocs’ MoldTrax software for tracking the performance and maintenance of molds and dies offers several features designed to make it faster and stronger.

PUBLISHED: 9/29/2014

Mold Core and Cavity Repair Restores Damaged Parts

Ezell Precision Tool, which produces mold cores, sleeves, cavities, and other die and mold-ready components, offers a service that refurbishes damaged mold cores, cavities and other tooling to print dimensions at a cost that it says typically is 70-...

PUBLISHED: 9/26/2014

Cleaner Removes Contaminants Without Wiping

PCS Co.’s Mold Brite non-chlorinated cleaner/degreaser is formulated to remove contaminants and clean mold surfaces down to virgin metal.

PUBLISHED: 9/25/2014

Box Furnace Designed for Preheating Molds

Grieve’s No. 863 is an electrically-heated, 1,400°F (~760°C) box furnace used for preheating molds.

PUBLISHED: 9/24/2014

Spotting Presses Provide Multi-Angle Access

Mold and die spotting presses in Millutensil’s compact BV Series take up less floor space than traditional mold presses and are designed so that the mold maintenance can be approached from a variety of angles with a simple touch of a control screen.

RSS RSS  |  Atom Atom