Linear Multi-Tip Nozzle

Technoject Machinery Corp. (Bolton, ON) offers the Star-Line nozzle from Heitec Hot Runner Systems with linear alignment based on the Star-Line nozzle with circular tip arrangement.

Technoject Machinery Corp. (Bolton, ON) offers the Star-Line nozzle from Heitec Hot Runner Systems with linear alignment based on the Star-Line nozzle with circular tip arrangement. The gating and sealing technologies were used without change, so that costly cavity splitting is not required. The gating is achieved with the tip inserted directly on the side of the molding surface. The tip inserts are installed after the assembly of the stationary side from the parting line of the mold. The nozzle is particularly suitable for molding long, thin-walled parts. With parallel alignment of the nozzles, parts can be direct gated from two sides. In other cases, linear layouts are necessary for certain part removal from the mold. The pitch dimension between cavities can be 48-56mm. Standard nozzles are designed for up to four tip inserts with a distance of between 10-26mm between parts.