Machining Centers; Booth S-8119
Haas Automation, Inc. will have 16 machines on display as well as three additional machines in vendor booths. The following are new:
The UMC-750 Universal Machining Center is a versatile five-axis, 40-taper VMC with 30" x 22" x 20" travels and an integrated dual-axis trunnion table. The show machine is equipped with a 12,000-rpm inline direct-drive spindle, and comes standard with a 40+1 tool side-mount tool changer.
The ST-10Y Compact Y-Axis Turning Center is small-footprint, Y-axis turning center that provides 4" of Y-axis travel (±2" from the centerline) for off-center milling, drilling, and tapping, and comes standard with high-torque live tooling and a servo-driven C axis for versatile 4-axis capability.
The ST-20SSY High-Speed Y-Axis Turning Center is a high-speed, Y-axis turning center that provides 4" of Y-axis travel, and includes high-torque live tooling and a servo-driven C axis to perform secondary machining operations. The machine has a maximum cutting capacity of 10" x 21", and is equipped with a 24-station hybrid BOT/VDI turret.
The ST-40 Large-Capacity Turning Center is the largest addition to the company’s line of new generation turning centers. It has a maximum cutting capacity of 25.5" x 44", with maximum swings of 34.5" over the front apron and 25.5" over the cross slide. The spindle bore is 4.62", with a bar capacity of 4". The machine’s 40-hp vector dual-drive spindle turns to 2400 rpm, and provides 1400 ft-lb of torque.
The Haas DS-30Y turning center combines dual-spindle turning with Y axis, C axis and live tooling. The opposed spindles support fully synchronized turning, and allow on-the-fly part pass-off to reduce cycle times. The machine comes standard with high-torque live tooling and a servo-driven C axis, and provides 4" of Y-axis travel (±2" from the centerline) for off-center milling, drilling, and tapping.
The company also has increased the speed and performance of the standard spindle on its expansive line of 40-taper VMCs, and introduced several new optional spindles. All Haas VF-1 through VF-12 40-taper VMCs are now equipped with a powerful 8100-rpm inline direct-drive spindle that is driven by a 30-horsepower vector drive system. An optional 10,000-rpm inline direct-drive spindle is available for shops wanting higher spindle speeds. Both spindles yield 90 ft-lb of cutting torque.
Haas will be at IMTS 2012 in Booth S-8119.
More technology – a lot more!
IMTS 2012 will be the year’s largest showcase of new product technologies and new process innovations. If you’re looking for machining, tooling, systems, software, solutions and more, you’ll find it at IMTS 2012.