Bunting Magnetics Co. will display its Eddy Current Separator (ECS) as part of its expanding Material Handling product line. The ECS product features an innovative rotor which maximizes gauss intensity on the belt surface and provides superior separation of non-ferrous materials.
The Bunting® ECS core is designed to provide a high level of gauss intensity to enhance separation on a wide range of nonferrous materials and part sizes. It is protected with the tough urethane belt and a carbon fiber epoxy shell. From aluminum cans to kitchen pots and pans, our ECS units do an excellent job of throw and separation.
The ECS attains a high recovery rate and provides our customers with cleaner materials, which is the bottom line result everyone is seeking. Also, the eccentric core is designed to be rotated to provide the most effective amount of product throw based on the material and application being used.
One of the key design features of the Bunting® Eddy Current Separator is how easy it is to maintain. Our efficient design includes a drop down side panel which can easily be lowered by one person for a quick and easy belt change. In fact, only one tool is required to loosen the belt, drop the side panel, replace the belt, re-track the belt and be back up and running in minutes!
The rubber lagged inverter duty motorized drive pulley at the in-feed provides for exceptional driving force, variable speed drive and a clean out-of-the-way design. It is easy to work on when needed and it provides a variable 100 to 300 fpm belt speed to maximize your separation. The ECS drive comes complete with two variable frequency drives (VFD) to program the ramp up of starting the machine.
The ECS unit has the highest quality urethane endless belt with 1 ½” urethane flexwall and three (3) sweeper cleats to help kick off ferrous contamination. In addition to the flexwall, the ECS has a secondary brush seal outside the flexwall which serves as a double seal of protection to prevent material from getting inside the conveyor frame.
Bunting® ECS units are available in 24”, 36”, 48” and 60” widths and 96” long. The 24” wide may be common in the Glass Recycling industry and the other three sizes in Municipal, Plastic, E-Scrap and Metal Recycling Industries depending on the capacity requirement.
buntingmagnetics.com
Related Content
-
Forces and Calculations Are Key to Sizing Core Pull Hydraulic Cylinders
To select the correct cylinder, consider both set and pull stroke positions and then calculate forces.
-
Fundamentals of Designing the Optimal Cooling System
The right mold components can help improve mold cooling and thereby produce higher-quality parts.
-
Solving Mold Alignment Problems with the Right Alignment Lock
Correct alignment lock selection can reduce maintenance costs and molding downtime, as well as increase part quality over the mold’s entire life.
