Flat Ejectors Have Tight Dimensional Tolerances for Flash-Free Production
Flat ejectors Z4656 and Z4655 from Hasco have either two or four corner radii over the full length of the ejector blade.
Flat ejectors are suitable for areas of injection molds like ribs or bars. The new HASCO America, Inc. flat ejectors have particularly tight dimensional and shape tolerances. Hasco says they permit optimum functioning of the mold and the flash-free production of injection moldings.
To ensure that they can readily reach the corner geometries of wire-eroded holes, the Hasco flat ejectors Z4656 and Z4655 have either two or four corner radii over the full length of the ejector blade. The ejectors enable a wide range of solutions for the functional demolding of plastic articles from injection molds. The flat ejector Z4655 has a corner radius of 0.2 mm on all four sides. The Z4656 has two corner radii, and it is suitable for segmented cavities.
Hasco flat ejectors are available ex stock in all sizes and can be mounted straightaway without requiring any adaptations. For a longer service life with elevated wear protection, Hasco offers versions Z4650 and Z4651 with a DLC coating.
Related Content
-
Advantages and Disadvantages of Copper and Graphite Electrodes
Both copper and graphite provide approximately the same end result, so it is important for a shop to consider the advantages and disadvantages of each material in order to discover what would work best in their shop floor environment.
-
Machining Center Spindles: What You Need to Know
Why and how to research spindle technology before purchasing a machining center.
-
Hands-on Workshop Teaches Mold Maintenance Process
Intensive workshop teaches the process of mold maintenance to help put an end to the firefighting culture of many toolrooms.
